Abstract:Traffic noise has gradually become the primary source of noise in urban areas. The risk of health issues such as cardiovascular diseases and sleep disturbances associated with noise exposure are receiving widespread attention. The skid resistance of asphalt pavements is important for safe driving. However, its antisliding performance deteriorates owing to automobile driving, and the antisliding index cannot satisfy requirements of long-term safe driving. Crumb rubber-modified asphalt (CRMA) has been widely used owing to its characteristics, such as excellent noise reduction, antisliding performance, and durability. This study aims to investigate the effect of crumb rubber (CR) particle content (0%, 2%, 3%, and 4% by weight of fine aggregates in asphalt mixture) on the antisliding and noise reduction characteristics of asphalt pavements. The functional performances of three different types of asphalt mixtures were tested to obtain the best gradation. Then, an accelerated wear tester was used to analyze the deterioration of the antisliding performance under different cumulative load times. A British pendulum number (BPN) tester and 3D laser technology were used to measure friction properties and texture depths of asphalt mixtures with varying CR particle contents after wheel-load repetitions. The tire-drop and standing wave tube methods were employed to evaluate the noise-reduction characteristics and acoustic absorption performance of asphalt mixtures with varying CR particle contents. Finally, the optimal CR particle content was determined using grey-target decision-making based on the entropy weight method. The results indicate that adding rubber particles to asphalt mixtures slows down the attenuation rate of BPN and texture depth, which shows a clear enhancement of the antisliding performance. The addition of rubber particles to asphalt mixtures improves the noise-reduction performance in tire-pavement systems by increasing damping properties and the sound absorption coefficient. The asphalt mixture with 3% rubber particles exhibited the optimal performance.

Two-Layer Porous Asphalt: Main Properties to Decrease the Noise Emissions

A New Eco-Friendly Porous Asphalt Mixture Modified By Crumb Rubber And Basalt Fiber

Study on Low Noise Asphalt Pavement Mixture Design

Investigation on an Absorbing Layer Suitable for a Noise-Reducing Two-Layer Pavement

Absorption characteristics of porous media: A model for traffic‐noise reducing asphalt

Laboratory and field evaluation of noise characteristics of porous asphalt pavement

Effects of asphalt pavement characteristics on traffic noise reduction in different frequencies

Investigation of Acoustic Properties of Poroelastic Asphalt Mixtures in Laboratory and Field Conditions

Control of Noise at the Entrance or Exit of Parking Garages

Tire/road noise, texture, and vertical accelerations: Surface assessment of an urban road

Design method of asphalt mixture with balanced noise reduction and mechanical properties

The Production of Porous Asphalt Mixtures with Damping Noise Reduction and Self-Healing Properties through the Addition of Rubber Granules and Steel Wool Fibers

Micro-structural analysis of noise reduction mechanism of porous asphalt mixture based on FEM

Life cycle approach for evaluating the environmental and economic viability of low-noise asphalt pavements

Porous top layer optimization of cement concrete slabs for tyre/road noise reduction

Experimental Analysis of Noise Characteristics on Different Types of Pavements inside and outside Highway Tunnels

Noise Reduction Characteristics of Macroporous Asphalt Pavement Based on A Weighted Sound Pressure Level Sensor

Mechanical and Acoustic Properties Composition Design and Effects Analysis of Poroelastic Road Surface

Effect of Crumb Rubber Particles on Antisliding and Noise-Reduction Performance of Asphalt Pavement

Effect of void ratio and rubber particles on the noise reduction mechanism and comprehensive performance of porous elastic road surface

Research and application of combined noise reduction method by using noise reducing pavement and noise barrier