Laboratory investigation on influence of mixture parameters on noise reduction characteristics of porous asphalt concrete
Bo Li,Kai Cao,Jianing Zhou,Andi Li,Mengkai Sun
DOI: https://doi.org/10.1080/10298436.2022.2092619
2022-07-01
International Journal of Pavement Engineering
Abstract:To investigate the influence of PAC mixture type and parameters on noise reduction performance and their variation patterns. This study investigated: the mixes' gradation characteristics parameters, the coefficient of uniformity (CU) and coefficient of curvature (CC); the nominal maximum size (DT), the material's composition parameter; the void ratio (VV) and thickness (H), the mixes' structural composition parameters, and finally, the surface density (BD). PAC specimens' sound absorption coefficient was measured indoors by the standing wave tube method, and the variation law were observed under different PAC parameters. PAC parameters' degree of influence on noise reduction performance was investigated through grey correlation theory and correlation analysis. The results indicated that increasing the void ratio and thickness improved the peak absorption coefficient and enhanced PAC's noise reduction performance effectively. Increasing the nominal maximum particle size weakened the noise reduction performance. In addition, the mix type and thickness had a greater influence on the basic trend in the absorption coefficient spectrogram. PAC's noise reduction effect was reflected primarily in the middle and high frequency band, and moved to the high frequency band gradually as the thickness increased. Overall, VV, H, and DT had a relatively large effect on PAC's noise reduction performance.
construction & building technology,engineering, civil,materials science, characterization & testing