Abstract:Elastic materials can be used to improve the impact sound insulation performance of the floating floor. In this study, the foam rubber damping pad and polyurethane foam board were used to improve the sound insulation performance in floating floors; the main performance parameters such as thickness, dynamic stiffness, resonance frequency and damping ratio of the foam rubber damping pad and the polyurethane foam board were tested and analyzed under different loading systems. Besides, a reinforced concrete residential compartment was used as experimental background, the foam rubber damping pad and polyurethane foam board were used as elastic damping materials to form the different structures of floating floors with different thicknesses; then the impact sound pressure level and its variation rule were tested under different conditions, and the influence of the reduction of impact sound pressure level on the floating floor was compared and analyzed. The results show that before the pavement, the thickness of the polyurethane foam board is 2 times the thickness of the foam rubber damping pad in the natural state; After pavement, under the action of the load, the thickness of the polyurethane foam board is 1.39–1.42 times that of the foam rubber damping pad. The sound insulation and damping performance of the polyurethane foam board are lower than that of the foam rubber damping pad. When the thickness of the floating plate is increased from 32 to 80 mm, the sound insulation performance of the floating floor structure made of polyurethane foam board and foam rubber damping pad has a deterioration tendency. This study provides a basic reference for the sound insulation of floating floors with the foam rubber damping pad or polyurethane foam board as the elastic damping cushion.

The effect of damping materials on heavy‐weight floor impact in apartment buildings

Reduction in Floor Impact Noise Using Resilient Pads Composed of Machining Scraps

Strengthening Slab Stiffness to Reduce Heavy-weight Impact Noise on the Floor

Vibration Reduction for Brick-concrete Buildings in an Old Residential Area

The Transmission Characteristics and Influence Prediction of Impulsive Vibration Caused by a Solid Metal Ball Impact in Buildings

Effects of Periodic Materials on Distance Attenuation in Wall–Slab Structures: An Experiment

Sound Insulation Performance of Foam Rubber Damping Pad and Polyurethane Foam Board in Floating Floors

Design and optimization of lightweight porous damping treatments

Numerical Investigation on the Natural Frequency of RC Slab Reinforced with Cambered Steel Beam for Reducing Heavy-Weight Impact Noise

Vibration and noise reduction for building floor structures based on new composite material vibration isolation pads

Structural vibration reduction achieved by lightweight porous layers through the near-field damping effect: A technical summary

VIBRATION COMFORT ANALYSIS AND DESIGN OF CONCRETE FLOOR BASED ON ANNOYANCE RATE

Structural vibration damping by the use of poro-elastic layers: a summary

Acoustic Retrofit Approach of an Apartment Living Room Using Multi-Perforated Gypsum Boards in Terms of Heavy-Weight Impact Sounds

Study on the Damping Dynamics Characteristics of a Viscoelastic Damping Material

Analysis of damping performance of frame structure with viscoelastic dampers

Effects of impact and microphone positions on heavy-weight floor impact sound pressure levels in concrete buildings

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Influence of Temperature on the Damping Properties of Selected Viscoelastic Materials

Performance of a passive rate‐independent damping device in a seismically isolated multistory building

Experimental Studies on Three Types of Vibration Isolators for Buildings Near Subways