Abstract:In view of the high-sensitivity vibration effect of precision instrument laboratory buildings under the influence of surrounding traffic loads, field micro-vibration tests under various working conditions were carried out based on actual projects. Combined with numerical simulation, measured data served as input loads to simulate the vibration effect of various traffic loads on the floor of a building structure, and the structural vibration laws under the comprehensive action of various loads were analyzed. The vibration isolation effect of the isolation ditch on the oblique orthogonal load was investigated according to the corresponding safety index. The results show that the main frequency components of the site vibration frequency caused by various traffic loads are approximately 25 Hz and that the root-mean-square speed value is stable below VC-E, which meets the design requirements. Under the comprehensive action of multiple loads, the site structure will produce a vibration amplification effect, which is obvious when all types of loads are distributed symmetrically and the curve distribution is controlled by load factors with large amplitudes. The isolation effect of a small isolation ditch is best when it is located close to the source and the building. The depth of the isolation ditch must be greater than the maximum depth of the source to achieve better results, and the width has little influence. The effect of a small isolation trench on vertical vibration is poor, and the oblique orthogonal triaxial load has a counteracting effect on the vertical component. Thus, additional structural vibration isolation measures are needed. The research results provide a reference for engineering vibration isolation, damping measures, and structural design.

Effect of viscous damping on power transmissibility for the vibration isolation of building services equipment

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Vibration characteristics and isolation in vibration-sensitive areas under moving vehicle load

Research on Vibration Transmissibility of Vibration Isolation System with Complex Vibration Environment

Study on the Force Transmissibility of Vibration Isolators with Geometric Nonlinear Damping

Research on Improved Magnetorheological Damper for Wide-Band Vibration Control

Influence of Depth and Position of Vibration-Isolating Slot on Damping Effect of Blasting Vibration

The Transmissibility of Vibration Isolators with A Nonlinear Antisymmetric Damping Characteristic

The Isolation Performance of Vibration Systems with General Velocity-Displacement-dependent Nonlinear Damping under Base Excitation: Numerical and Experimental Study

Reducing Force Transmissibility in Multiple Degrees of Freedom Structures Through Anti-Symmetric Nonlinear Viscous Damping

Effects of anti-symmetric nonlinear viscous damping on the force transmissibility of multi-degree of freedom structures

Analysis and Design of the Force and Displacement Transmissibility of Nonlinear Viscous Damper Based Vibration Isolation Systems

Influence of nonlinear hysteretic damping on force transmissibility of a vibration isolation system

Effect of Viscous Heating in Fluid Damper on the Vibration Isolation Performance

The force transmissibility of MDOF structures with a non-linear viscous damping device

Indirect Estimation of Force Transmissibility in a Vibration Isolation System Based on Vibration Responses

Active/passive vibration isolation with multi-axis transmission control: Analysis and experiment

Study of the Micro-Vibration Response and Related Vibration Isolation of Complex Traffic Load-Induced Experimental Buildings

Theoretical study of the effects of nonlinear viscous damping on vibration isolation of sdof systems

Modeling and Numerical Simulations of an Active Vibration Isolation Module by the Power Flow Analysis

Experiment Research and Nonlinear Analysis to Visco-Elastic Damping Structure for Whole-Spacecraft Passive Vibration Isolation System