Abstract:s By exploiting the enhanced nonlinearity of multiple outer isolated detached transmissibility curves (OIDTCs), the isolation frequency of the X-shaped two-stage vibration isolator is effectively reduced. A six-degree-of-freedom dynamic equation is established using the Lagrange equation, and solved using the incremental harmonic balance method (IHBM) to address the nonlinear dynamic issues of the X-shaped two-stage vibration isolation system. Furthermore, the application of the Floquet theory enhances the understanding of the stability characteristics of the system. This study reveals a non-traditional perspective: properly reducing the system stiffness k 1 can enhance nonlinear characteristics, thus improving vibration isolation performance. As the side length l of the quadrilateral X-shaped isolator increases, the maximum transmissibility near Ω/ ω 1 = 0.86 elevates, resulting in a weakening of the vibration isolation effect. Additionally, in the vicinity of Ω/ ω 1 = 1.32, the increase in l causes the disappearance of the left transmission peak, indicating an enhancement in vibration isolation effectiveness at this frequency. Moreover, an increase in the lightweight plate-to-lightweight rods mass ratio m influences the shift of frequency jump points and expands the coverage range of OIDTCs, thereby leading to high transmissibility over a broad frequency range, consequently diminishing the vibration isolation effect. Importantly, this paper also uncovers some unreported phenomena, including multiple OIDTCs and high transmissibility over a broad frequency range. Through rigorous experimental validation and meticulous comparison with theoretical models, the experimental data confirm the accuracy of the analytical results, particularly the acquisition of experimental data for Type-3 and Type-4 OIDTCs, which strongly support the multiple OIDTCs discovered in this study. Comparisons of the isolation performance between single-degree-of-freedom two-stage and X-shaped two-stage vibration isolation systems reveal that the latter exhibits enhanced nonlinearities formed by the collaboration of softening nonlinearity and outer isolated detached nonlinearity. This collaboration results in multiple force transmissibility peaks shifting towards lower frequencies, thereby reducing the vibration isolation frequency and improving low-frequency vibration isolation performance.

The Transmissibility of Vibration Isolators with A Nonlinear Antisymmetric Damping Characteristic

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

Evaluation of transmissibility for a class of nonlinear passive vibration isolators

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

On the Analysis of A Piecewise Nonlinear-Linear Vibration Isolator with High-Static-Low-Dynamic-Stiffness under Base Excitation

Effect of Negative Stiffness Mechanism in a Vibration Isolator with Asymmetric and High-Static-low-dynamic Stiffness

Reducing Force Transmissibility in Multiple Degrees of Freedom Structures Through Anti-Symmetric Nonlinear Viscous Damping

ANALYSIS ON TRANSMISSIBILITY FOR A CLASS OF NONLINEAR VIBRATION ISOLATORS

Research on Vibration Transmissibility of Vibration Isolation System with Complex Vibration Environment

Effects of anti-symmetric nonlinear viscous damping on the force transmissibility of multi-degree of freedom structures

Theoretical study of the effects of nonlinear viscous damping on vibration isolation of sdof systems

Design and Analysis of a Vibration Isolator with Adjustable High Static–Low Dynamic Stiffness

Analysis and Design of the Force and Displacement Transmissibility of Nonlinear Viscous Damper Based Vibration Isolation Systems

The force transmissibility of MDOF structures with a non-linear viscous damping device

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Displacement and Force Transmissibility of a High-Static-Low-Dynamic-Stiffness Isolator with Geometric Nonlinear Damping

Analysis and Experimental Study on Dynamic Characteristics of an Integrated Quasi-Zero Stiffness Isolator

Reducing vibration isolation frequency in an X-shaped two-stage nonlinear system