Abstract:Overhangs are usually inevitable in Additive Manufacturing (AM). Moreover, making their downward surfaces reach higher accuracy after printing has an imperative impact on improving the accuracy of them and their corresponding as-printed parts. Although extensive studies have been devoted to improving the accuracy of as-printed parts, the effective, general, reliable, and less-consumption (in time and material) approach to make an overhang (especially on its downward surfaces) reach its ideal accuracy is still rare. Hence, a new machine-leaning-based geometric compensation approach is proposed in this study. First, based on the Taguchi method, a series of (overhang) benchmarks are designed and printed to collect the (geometric) deviations of the downward surfaces. With these data, a new deviation predictor is established based on the gaussian process regression model. The predictor can effectively predict the deviation(s) (as well as its corresponding quantified uncertainty) of each downward surface (after printing) by using a pointwise manner. Meanwhile, to make the downward surface of an overhang meet its ideal accuracy (after printing) with high confidence, a specific stochastic chance-constrained programming problem is first formulated to evaluate the new and suitable overhang height of each point on the downward surface. Based on the above-mentioned predictor, the programming problem gets solved by developing a new overhang-height optimization method that integrates the Monte Carlo simulation with the particle swarm optimization. After that, a support structure-associated compensation method is presented to make a pointwise compensation (according to the above-evaluated overhang height) on the downward surface and determine the support structures’ optimized number and anchor positions. Finally, experiments on several representative overhangs are also implemented based on a typical material extrusion machine to validate the effectiveness of the proposed approach. The results show that the proposed approach reduces the deviations of the downward surface by up to 63.92% on average, saving up to 40% of material (less support structures). In addition, methodological comparisons with state-of-the-art approaches are also implemented. The comparisons show that the proposed approach has the great potential to reliably improve the accuracy of the overhang’s downward surface(s) after printing in a less-consumption manner.

Forming characteristics and control method of weld bead for GMAW on curved surface

A High-Confidence Geometric Compensation Approach for Improving Downward Surface Accuracy

Forming optimization for WAAM with weaving deposition on curved surfaces

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Effect of Mechanical Stirring on High-Speed GMAW Hump Bead

Formation optimization of downward overlaid Inconel 625 on curved surface of X65 pipeline basing on dynamic behavior of molten pool

Dynamic Modeling of Weld Bead Geometry Features in Thick Plate GMAW Based on Machine Vision and Learning

Numerical Analysis of Welding Defects in the Horizontal Position Laser-Metal Inert Gas Hybrid Fillet Welding

Region-based path planning method with all horizontal welding position for robotic curved layer wire and arc additive manufacturing

Mechanisms of Gravitational Influence on Weld Pool Behavior and Weld Bead Performance in Variable Polarity Plasma Arc Welding across Different Welding Position

A Net Shape Profile Extraction Approach for Exploring the Forming Appearance of Inclined Thick-Walled Structures by Wire Arc Additive Manufacturing

Research on GMAW Based Non-Supporting Thin-Wall Structure Manufacturing

Numerical analysis of heat transfer and fluid flow characteristics and their influence on bead defects formation in oscillating laser-GMA hybrid welding of lap joints

Surface tension-powered build dimension control in laser additive manufacturing process

Offset impacting of a liquid aluminum droplet train on a molten pool on a horizontally moving substrate during TIG-assisted droplet deposition manufacturing

Fluid Flow Characteristics and Weld Formation Quality in Gas Tungsten Arc Welding of a Thick-Sheet Aluminum Alloy Structure by Varying Welding Position

The Influence of Oscillation Parameters on the Formation of Overhead Welding Seams in the Narrow-Gap GMAW Process

Humping Formation and Suppression in High-Speed Laser Welding

Welding between confinements as a new approach for high deposition rate additive manufacturing with laser-assisted double wire welding with nontransferred arc

Influencing of Molten Pool Dynamic Behavior on the Weld Formation during the Laser‐Arc Hybrid Welding of 12 mm Thick Steel

Bead shape control in high-speed fillet welding using hot-wire GMA laser hybrid welding technology