Abstract:This work highlights the necessity of taking into account surface roughness when conducting experimental tests, and when using numerical simulations to precisely calculate the turbulent lift and drag of wind-tunnel models or real aircraft in transonic conditions. The present article is a continuation of "Turbulent drag induced by low surface roughness at transonic speeds: Experimental/numerical comparisons," Physics of Fluids, Vol. 32, 045108 (2020) by Hue and Molton. The outcomes of this former study, which was focused on flat plate samples, are here applied to a three-dimensional aircraft configuration: the Common Research Model used as a reference in the recent international Drag Prediction Workshops. Experimental campaigns have been performed in the largest ONERA wind tunnels S1MA and S2MA involving models with average surface roughness heights Ra close to 0.5 micrometers, wingspans up to 3.5 meters, Mach and Reynolds numbers up to 0.95 and 5 million respectively. Reynolds-averaged Navier–Stokes computations based on the wind-tunnel tests have then been carried out, using the equivalent sand-grain roughness height approach as well as a Musker-type correlation to determine relevant k s values. The results of both the experimental and numerical campaigns have demonstrated that the aerodynamic coefficients of the aircraft can be significantly affected by the surface roughness, even with roughness Reynolds numbers k s + potentially below the usual threshold values sometimes considered in engineering applications (i.e. in the order of 3.5 to 5). In particular, the surface roughness effects on lift and drag have been studied using far-field analyses to evaluate the responses of friction, viscous pressure, wave and lift-induced drag components. Finally, the numerical studies have been extended to the full-scale geometry in flight conditions in order to assess the roughness effects and potential gains in realistic aircraft operating conditions.

Control of a boundary layer over a wind turbine blade using distributed passive roughness

Roughness Effects on Flow Losses of a High-Lift Low-Pressure Turbine Cascade

Numerical investigation of blade roughness impact on the aerodynamic performance and wake behavior of horizontal axis wind turbine

Numerical simulation of surface roughness effect on wind turbine thick airfoils

Impact and mitigation of blade surface roughness effects on wind turbine performance

Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor

Numerical Analysis of Leading-Edge Roughness Effects on the Aerodynamic Performance of a Thick Wind Turbine Airfoil

Dust Effect on the Performance of Wind Turbine Airfoils

Numerical Analysis of Atmospheric Turbulence Effects on Wind Turbine

Influence of Roughness on Aerodynamic Performance of Dedicated Wind Turbine Airfoil

Delaying transition induced by a strip of distributed roughness using additional fine grit roughness

Boundary layer forcing on a rotating wing at low Reynolds numbers

Numerical Simulation of Aerodynamic Performance of Film Cooling on A Flat Plate with Surface Roughness

Effect of Vortex Generations on Aerodynamic Performance of Rough Wind Turbine Airfoil

Effect of Wind Turbine Blade Profile Surface Roughness on Ice Accretion – A Numerical Case Study

A Study on Performance Influences of Airfoil Aerodynamic Parameters and Evaluation Indicators for the Roughness Sensitivity on Wind Turbine Blade

Effects of Surface Roughness and Turbulence Intensity on the Aerodynamic Losses Produced by the Suction Surface of A Simulated Turbine Airfoil

A Roughness Prediction Method by Particle Deposition and Its Effect on Flow and Heat Transfer in High-Pressure Turbine Cascade

AERODYNAMIC PERFORMANCE INFLUENCE WITH ROUGHNESS ON WIND TURBINE AIRFOIL SURFACE

Surface roughness effects on transonic aircraft performance: experimental/numerical comparisons

Effects of Simulated Surface Roughness on Flow Characteristics in Symmetrical Airfoil