Abstract:New methods in lowering energy consumption costs for evaporation and concentration are needed in many commercial chemical processes. Pervaporation is an underutilized, low-energy processing method that has a potential capability in achieving lower energy processing costs. A recently developed new electrochemical process that can generate a 5–25 wt% pure formic acid (FA) from the electrochemical reduction of CO2 requires a low-energy process for producing a more concentrated FA product for use in both on-site and commercial plant applications. In order to accomplish this, a 25 cm2 membrane area pervaporation test cell was constructed to evaluate the FA-H2O system separation performance of three distinct types of membrane candidates at various FA feed concentrations and temperatures. The selection included one cation ion exchange, two anion ion exchange, and two microporous hydrophobic membranes. The permeation flux rates of FA and H2O were measured for FA feed concentrations of 10, 20, 40, and 60 wt% at corresponding temperatures of 22, 40, and 60 °C. The separation performance results for these particular membranes appeared to follow the vapor liquid equilibrium (VLE) characteristics of the vapor phase in the FA-H2O system as a function of temperature. A Targray microporous hydrophobic high-density polyethylene (HDPE) membrane and a Chemours Nafion® N324 membrane showed the best permeation selectivities and mass flux rates FA feed concentrations, ranging from 10 to 40 wt%. The cation and anion ion exchange membranes evaluated were found not to show any significant enhancements in blocking or promoting the transport of the formate ion or FA through the membranes. An extended permeation cell run concentrated a 10.12% FA solution to 25.38% FA at 40 °C. Azeotropic distillation simulations for the FA-H2O system using ChemCad 6.0 were used to determine the energy requirement using steam costs in processing FA feed concentrations ranging from 5 to 30 wt%. These experimental results indicate that pervaporation is a potentially useful unit process step with the new electrochemical process in producing higher concentration FA product solutions economically and at lower capital costs. One major application identified is in on-site production of FA for bioreactors employing new types of microbes that can assimilate FA in producing various chemicals and bio-products.

Enhancement of Esterification of Propionic Acid with Isopropyl Alcohol by Pervaporation Reactor

Preparation of Fatty Acid Methyl Ester Catalyzed by Solid Acid from By- Products of Plam Oil

Esterification of propionic acid with isopropyl alcohol over ion exchange resins: Optimization and kinetics

Application of Pervaporation Membrane to Catalytic Esterification Reaction

P(Vdf-Co-Hfp) Membrane for Recovery of Aroma Compounds from Aqueous Solutions by Pervaporation - I. Ethyl Acetate/Water System

Process optimization and kinetic modeling for esterification of propionic acid with benzyl alcohol on ion-exchange resin catalyst

Esterification of propanoic acid in the presence of a homogeneous catalyst

Optimization of the esterification of oleic acid and ethanol in a fixed bed membrane reactor by response surface method

Application of silicon rubber pervaporation membrane to butanol fermentation

Enhancement of hydrodynamic cavitation in the esterification reaction of soybean oil deodorizer distillate

Heterogeneous Catalysed Esterification of Propionic Acid with n-Amyl Alcohol over a Microporous Cation-exchange Resin Dowex 50Wx4

Acid-Functionalized PVA Composite Membranes for Pervaporation-Assisted Esterification

Two-step hierarchical crosslinking to construct acid-resistance membrane for pervaporation dehydration of artificial esterification reaction

Pervaporation characteristics of PDMS/PMHS nanocomposite membranes inclusive multi-walled carbon nanotubes for improvement of acetic acid–methanol esterification reaction

Study on the Coupling of Pervaporation Dehydration and Esterification of Adipic Acid and Methanol

Investigating Pervaporation as a Process Method for Concentrating Formic Acid Produced from Carbon Dioxide

Reaction Thermodynamic and Kinetics for Esterification of 1-Methoxy-2-Propanol and Acetic Acid over Ion-Exchange Resin

Greener and higher conversion of esterification via interfacial photothermal catalysis

Surface-modified polyvinyl alcohol (PVA) membranes for pervaporation dehydration of epichlorohydrin (ECH), isopropanol (IPA), and water ternary feed mixtures

Modified aromatic polyimide membrane preparation and pervaporation results for esterification system

Stability and pervaporation characteristics of PVA and its blend with PVAm membranes in a ternary feed mixture containing highly reactive epichlorohydrin