Abstract:Biodiesel, a renewable fuel of vegetal origin, has been an object of a rapidly growing interest, in the latest years, both as a pure fuel and as blending component to reduce exhaust pollutants of traditional diesel fuel. Biodiesel is conventionally produced through a well-established technology that involves the use of alkaline catalysts and is, therefore, not compatible with the presence of free fatty acids (FFAs) in the feedstock due to the formation of soaps. Also the presence of FFA in small amounts is detrimental, because, formed soaps strongly affect the successive glycerol separation giving place to a long settling time. Normally, highly refined vegetable oils are used as raw materials for biodiesel production. A preliminary stage of acidity reduction is necessary, when the starting material is characterized by a high free acidity (higher than 0.5% by weight). This pre-treatment can be pursued, as example, by means of an esterification reaction of the FFAs with methanol, catalyzed by sulphonic ionic exchange resins. In the present work, a batch reactor has been used for the study of the above-mentioned reaction and different acid ionic exchange resins have been tested as heterogeneous catalysts. Two kinds of substrates have been submitted for esterification with methanol: a model mixture of soybean oil artificially acidified with oleic acid and a commercial high-acidity mixture of waste fatty acids (oleins). A detailed kinetic model has been developed and tested in which the following key phenomena, characterizing the system, have been introduced: (i) the physical phase equilibrium (partitioning equilibrium) of the components between the resin-absorbed phase and the external liquid phase; (ii) the ionic exchange equilibria; (iii) an Eley–Rideal surface reaction mechanism. The developed kinetic model was able to correctly interpret all the experimental data collected, both as a function of the temperature and of the catalyst concentration.

Process optimization and kinetic modeling for esterification of propionic acid with benzyl alcohol on ion-exchange resin catalyst

Esterification of propionic acid with isopropyl alcohol over ion exchange resins: Optimization and kinetics

Optimization of enzymatic resolution technique of glycidyl butyrate via response surface methodology]

Statistical Optimization of Process Parameters for Lipase-Catalyzed Synthesis of Triethanolamine-Based Esterquats Using Response Surface Methodology in 2-Liter Bioreactor

Optimization of reaction parameters for the synthesis of natural aroma esters by factorial design

Enhancement of Esterification of Propionic Acid with Isopropyl Alcohol by Pervaporation Reactor

Synthesis of propyl benzoate by solvent-free immobilized lipase-catalyzed transesterification: Optimization and kinetic modeling

Heterogeneous Catalysed Esterification of Propionic Acid with n-Amyl Alcohol over a Microporous Cation-exchange Resin Dowex 50Wx4

Esterification of propanoic acid in the presence of a homogeneous catalyst

Reaction Thermodynamic and Kinetics for Esterification of 1-Methoxy-2-Propanol and Acetic Acid over Ion-Exchange Resin

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Kinetic Study on Esterification of Acetic Acid with Isopropyl Alcohol Catalyzed by Ion Exchange Resin

Benzyl propionate synthesis by fed-batch esterification using commercial immobilized and lyophilized Cal B lipase

Improved biocatalytic activity of steapsin lipase in supercritical carbon dioxide medium for the synthesis of benzyl butyrate: A commercially important flavour compound

Kinetics and modeling of fatty acids esterification on acid exchange resins

Study of lipase-catalysed synthesis of ascorbyl benzoate in cyclohexanone using response surface methodology

Reaction Thermodynamic and Kinetics for Esterification of Propylene Glycol Monomethyl Ether and Acetic Acid over Ion-exchange Resin

Kinetic Model of Olefins/Isobutane Alkylation Using Sulfuric Acid as Catalyst

Esterification Research on a Bio-Oil Model Compounds System with an Optimal Solid Acid Catalyst

Optimization of process variables for esterification of bio-oil model compounds by a heteropolyacid catalyst

Additive and Base free Tandem Aerobic Oxidative Cleavage of Olefins to Esters using Bifunctional Mesoporous Copper Incorporated Al-SBA-15