Abstract:The ceramic coating was prepared on surface of AZ31 Magnesium alloy by laser cleaning (LC) combined with micro-arc oxidation (MAO) to improve its corrosion resistance. The voltage and current were collected during the MAO process. The laser confocal, SEM/EDS, XRD and XPS were adopted to characterize the morphology, structure and phase compositions of the MAO coating. The results showed that the laser crater morphology formed on the AZ31 magnesium alloy substrate after LC treatment had a certain influence on the discharge mode and coating growth mechanism during the MAO process. The arc was preferentially generated around the laser crater due to the tip effect, resulting in the formation of MAO coating on the periphery of the laser crater first, and then gradually inside. At the same time, the oxides on surface of the LC treatment substrate increased, which would lead the generation of MAO coating more uniform and dense. Moreover, the corrosion resistance of the MAO coatings with and without LC treatment were tested by electrochemical and salt spray corrosion experiments. The self-corrosion current density of LC(20 W)/MAO coating was 1.096 × 10 −8 A·cm −2 , much lower than that of MAO coating without LC treatment (3.882 × 10 −7 A·cm −2 ) and the alloy substrate (4.499 × 10 −5 A·cm −2 ). Furthermore, there were no obvious corrosion traces for the LC(20 W)/MAO coating after 192 h of salt spray. The laser cleaning treatment combined with micro-arc oxidation provides a great important method for magnesium alloy to improve its corrosion resistance.

Effect of laser energy density on surface physical characteristics and corrosion resistance of 7075 aluminum alloy in laser cleaning

Experimental study on hydrophobic properties and corrosivity of laser cleaned 7075 aluminum alloy anodized film surface

The energy density threshold evaluation for high-precision laser cleaning of the oxidized layer on 7075 aluminum alloy with 100 ns laser

Investigation on the Surface Properties of 5A12 Aluminum Alloy after Nd: YAG Laser Cleaning

Experimental study and mechanism analysis of a pulsed laser cleaning aluminum alloy process

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Oxygen content and morphology of laser cleaned 5083 aluminum alloy and its influences on weld porosity

Welding Defect and Mechanical Properties of Nanosecond Laser Cleaning 6005A Aluminum Alloy

Research Progress and Challenges in Laser-Controlled Cleaning of Aluminum Alloy Surfaces

Effect of Laser Strengthening on Electrochemical Corrosion of AA6082 Aluminum Alloy

Effect of laser cleaning on the growth and properties of micro-arc oxidation layers of AZ31 magnesium alloy

Effect of laser power on the microstructure and mechanical properties of laser-assisted cold sprayed 7075 aluminum alloy deposits

Determination on Surface Morphology of Laser Non-Destructive Cleaning Coatings on Aviation Aluminum Alloy

Effect of laser power on cleaning mechanism and surface properties

Removal mechanism of laser cleaning for inorganic thermal control coatings on aluminum alloys

Investigations on electrochemical corrosion behavior of 7075 aluminum alloy with femtosecond laser modification

Modification of TA15 alloy surface by high-pulse-frequency laser cleaning

Effect of Low energy laser shock peening on plastic deformation, wettability and corrosion resistance of aluminum alloy 7075 T651

Effect of the overlap ratio on surface properties of 7B04 aluminum alloy for aviation during laser derusting

On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates

Removal mechanism of surface cleaning on TA15 titanium alloy using nanosecond pulsed laser