Abstract:Supersonic laser deposition is an innovative surface treatment technology, which combines supersonic cold spray technology and laser irradiation heating technology. It has the advantages of preparing hard metal composite coating with high deposition efficiency. In this work, composite coatings of hard 7075 Al alloy and Al2O3 ceramic particles were prepared on 7B04 Al alloy substrate by supersonic laser deposition technology. The effect of laser power on the deposition characteristics and mechanical properties of coatings was systematically studied. The microstructure, phase composition and microhardness of the coating were characterized and analyzed by field emission electron microscope (SEM), energy dispersive analyzer (EDS), X-ray diffractometer (XRD) and microhardness tester. The results show that with the increase of laser power, the thickness, density, deposition efficiency, hardness and the dispersion uniformity and deposited amount of Al2O3 particles in the coating increase. When the laser power is 600 W, the coating thickness reaches to 1543 mu m, the coating porosity is only 0.05%, the relative deposition efficiency of Al2O3 particles is 65%, and the coating HV hardness rises to 1911 MPa. However, when the laser power is enhanced to 900 W, the thickness and deposition efficiency of the coating slow down, and the porosity increases significantly. The oxidation of coating materials is found, and the relative deposition efficiency of Al2O3 particles and the coating hardness decrease significantly. In summary, the appropriate amount of laser input is beneficial to improve the plastic deformation of aluminum alloy particles, resulting in significant enhancement of coating quality, while the excessive laser input leads to softening of aluminum alloy particles and even oxidation of powder materials, which deteriorate the quality of deposited coatings.

Determination on Surface Morphology of Laser Non-Destructive Cleaning Coatings on Aviation Aluminum Alloy

Numerical Simulation and Experimental Study of Nanosecond Pulsed Laser Cleaning of Aluminum Alloy Surface Paint Layer

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Experimental study and mechanism analysis of a pulsed laser cleaning aluminum alloy process

Laser cleaning for inorganic thermal control coatings on aluminum alloys: Microstructure evolution and mechanical properties of substrate

Removal mechanism of laser cleaning for inorganic thermal control coatings on aluminum alloys

Research Progress and Challenges in Laser-Controlled Cleaning of Aluminum Alloy Surfaces

Research on Laser Cleaning Technology for Aircraft Skin Surface Paint Layer

Investigation on the Surface Properties of 5A12 Aluminum Alloy after Nd: YAG Laser Cleaning

Nanosecond pulsed laser cleaning of titanium alloy oxide films: Modeling and experiments

Laser Cleaning Optimization of Absorbing Coatings on the Surface of Aircraft Metal Structures

Removal mechanism of surface cleaning on TA15 titanium alloy using nanosecond pulsed laser

Effect of the overlap ratio on surface properties of 7B04 aluminum alloy for aviation during laser derusting

Welding Defect and Mechanical Properties of Nanosecond Laser Cleaning 6005A Aluminum Alloy

Evaluation of laser cleaning effect for the removal of paint on aluminum alloys

Ablation oxidation and surface quality during laser polishing of TA15 aviation titanium alloy

Experimental study on hydrophobic properties and corrosivity of laser cleaned 7075 aluminum alloy anodized film surface

The Characterization of Laser-Induced Particles Generated from Aluminum Alloy in High Power Laser Facility

Thermal stress analysis of laser cleaning of aluminum alloy oxide film

Microstructure and Properties of 7075/al2o3 Composite Coatings Prepared by Supersonic Laser Deposition

On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates