Abstract:Electroless plating on Acrylonitrile Butadiene Styrene (ABS) is a metallization process that involves a reduction and oxidation reaction between the nickel source and the substrate material. The purpose of this research is to determine the ability of nickel deposition in the nickel electroless plating process with a specific etching time variation. This nickel electroless procedure begins with a chromic acid etching process that can last anywhere from 15 to 55 minutes and is useful for increasing roughness and creating submicroscopic cavities. After the etching process is finished, the surface roughness test is performed with a Mitutoyo SJ-210. Additionally, the activation step is carried out for 5 minutes in order for the polymer to become a conductor, allowing the plating process to proceed. The electroless plating process was then carried out for 55 and 75 minutes, with the goal of depositing nickel metal on the ABS surface. The coating results were analyzed using Fourier Transform Infrared (FTIR) spectroscopy IRSpirit/ATR-S serial No. A224158/Shimadzu to determine the functional groups formed both before and after the coating process, X-Ray Diffraction (XRD) to determine the character of the crystal structure, and phase analysis of a solid material using PANalytical type E'xpert Pro, To determine the surface morphology, the Zeiss EVO MA 10 was used to perform scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS) at 1000x magnification. The test findings demonstrate that, based on a range of investigations, etching variations of 15,25,35,45, and 55 minutes etching time 55 minutes are the best nickel deposited substrates, as evidenced by EDS data, where this treatment has the largest weight fraction of nickel. As a result, the longer the etching period, the rougher the surface becomes, affecting the capacity of nickel deposition to increase. Furthermore, it can be demonstrated in this investigation that the nickel deposited is in an amorphous form.

Study of electroless copper plating on ABS resin surface modified by heterocyclic organosilane self-assembled film

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Technology of Electroless Copper Plating on ABS Plastics

Process of Direct Copper Plating on ABS Plastics

Electroless Copper Plating on Liquid Crystal Polymer Films Using Dimethylamine Borane As Reducing Agent

A New Palladium-Free Surface Activation Process for Cu Electroless Plating on ABS Plastic

Experimental and Theoretical Study on Self-Annealing Behavior of Copper Film Electroplated with 2-Mercaptopyridine and 2-Aminobenzothiazole As Additives

Improvement of Copper Plating Adhesion on Silane Modified Pet Film by Ultrasonic-Assisted Electroless Deposition

Photoselective Deposition of Copper Lines on ABS Substrates by Electroless Plating

Morphology Behavior of Copper Films Deposited after Wet Surface Treatment on Polished Alumina

Compound additives and stress study of EDTA-2Na chemical copper plating system in printed circuit boards

Study of Surface Treatment of Copper Fillers for Improvement of Electrically Conductive Adhesives

Pretreatment for Electroplating of ABS Plastics by Potassium Hypermanganate

Electroless And Eletroplating Copper On Liquid Crystal Polymer (Lcp) For High Frequency Applications

Copper Surface Treatment in Metal-Polymer Direct Molding Technology

A facile process to fabricate electroless plating on PET sheet: Effects of surface roughness on adhesive force, electronic and structural properties of copper coating

Examination of the metallization behaviour of an ABS surface

Surface Protection Of Copper By Self-Assembly Of Novel Poly(5-Methylenebenzotriazol-N-Yl)

The Role of Self-Assembled Monolayers in the Surface Modification and Interfacial Contact of Copper Fillers in Electrically Conductive Adhesives

STUDY OF ELECTROLESS NICKEL PLATING ON RAPID PROTOTYPING MODEL USING ACRYLONITRILE BUTADIENE STYRENE

Initial surface roughness of electrochemical plating copper under different conditions