Abstract:A composite is a material having two or more components with diverse chemical or physical properties. Due to the special feature of the composites, the use of various materials and research in their field is developing. By considering the above points, in this work a series of the nanocomposites from α-Al2O3 nanoparticles (α-Al2O3 NPs, at 2, 5, and 10% by wt), carbon fibers (CF), and epoxy resin were fabricated and their thermal and mechanical performance were evaluated. The dispersion mode of α-Al2O3 NPs in the composite structure was evaluated through a field emission scanning electron microscope (FE-SEM). The FE-SEM analysis revealed that the α-Al2O3 NPs and CF were homogeneously dispersed in the epoxy matrix and the morphology of α-Al2O3 NPs–CF/epoxy composites is uniform. The results of the mechanical tests exhibited that the flexural strength and module of E-40 (epoxy resin: carbon fiber: α-Al2O3, 65:25:10) were at their highest levels; 295 MPa and 11,917 MPa, respectively. For flexural strength and module, improvements were made by 95.5% and 91.8% in comparison with the samples in the absence of NPs. The highest tensile strength was obtained for E-30 (epoxy resin: carbon fiber: α-Al2O3, 70:25:5); 341 MPa. There is a 24% enhancement in tensile strength as compression by a sample without NPs. Accordingly, we can conclude that the addition of α-Al2O3 NPs in composite structures has significantly affected the mechanical response. However, the thermal analysis was illustrated as an inverse trend by the addition of NPs. Therefore, the performance of experimental tests revealed that the composite with the required feature could be prepared based on the obtained results.

Fabrication and Characterization in Composites of Nanoenergetic Materials and Porous Metal with UV Ink Method

Charge Dynamics and Thermal Properties of Epoxy Based Micro and Nano Hybrid Composites at High Temperatures

Fabrication of Nanocrystalline Zro2 Particle Reinforced Aluminum Alloy Composite by Squeeze Casting Route

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

Synthesis and microscopy analysis of iron oxide nanoparticle and porous carbon nanofiber composites

Near-net shaping of laminated Al/Al2O3 composites by direct ink writing and pressure infiltration

Preparation and Characterization of Composites of Ferroelectric and Nanoscale Metal Particles

Reinforcing and Toughening Alumina/titania Ceramic Composites with Nano-Dopants from Nanostructured Composite Powders

Study on the Film-Forming Mechanism of Polymer–Metal Oxide Composite Ink Systems Containing Different Polymer Molecules

Preparation and Characterisation of the NBC/CL-20/AP Nanoenergetic Composite Materials

Carbon fiber/epoxy resin/α-aluminum oxide nanocomposites; fabrication, mechanical and thermal analysis

The Effect of the Inorganic Nanomaterials on the UV-absorption, Rheological and Mechanical Properties of the Rapid Prototyping Epoxy-Based Composites

Inorganic/inorganic composites through emulsion templating

Fabrication of Metallic Micro-/Nano-Composite Materials for Environmental Applications

Preparation and sintering behaviour of nanostructured alumina/titania composite powders modified with nano-dopants

Effects of High Intensity Ultrasonic Processing on Preparation of SiC Nano-Particles Reinforced Magnesium Matrix Composite

Ultrafine-bubble-water-promoted Nanoceramic Decoration of Metal Powders for Additive Manufacturing

Fabrication of Energetic Aluminum Core/hydrophobic Shell Nanofibers Via Coaxial Electrospinning

The Synergetic Effect of Metal-Loaded Electrospun Carbon Fibers for Photothermal Conversion

Nanostructure transformation in epoxy/block copolymer composites with good mechanical properties

A Novel Approach to Fabricate Ceramic/metal Interpenetrating Phase Composites by Ultrasonic-Assisted Spontaneous Infiltration