Abstract:Statement of problem Three-dimensional (3D) printing has become popular in dentistry, but studies on the influence of incorporating organic and inorganic nanofillers on 3D printed materials are lacking. Purpose The purpose of this in vitro study was to assess the flexural strength, color, and antimicrobial efficacy of 3D printed photopolymerizable resin upon adding titanium dioxide nanoparticles (TiO 2 NPs) and silanized chitosan nanoparticles ( s CS NPs). Material and methods A stereolithographic material (VarseoSmile Crown plus; Bego) was used as a control group (VSC resin), and 3 nanocomposite resin groups were prepared by adding nanoparticles as follow: titanium dioxide group (VSC resin + 0.4% wt. TiO 2 NPs), chitosan group (VSC resin + 0.4% wt. s CS NPs), and hybrid group (VSC resin + 0.2% wt. TiO 2 NPs + 0.2% wt. s CS NPs). A total of 132 specimens were designed by using a free computer-aided design software program, printed, postpolymerized, and divided into 4 groups. The nanocomposite resins were characterized using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and Fourier-transform infrared spectroscopy (FTIR). Bar shaped specimens (n=44) were tested for 3-point flexural strength using a universal testing machine followed by the color measurement of disk-shaped specimens (n=44) with a spectrophotometer. Antimicrobial capacity was measured with Streptococcus mutans , and absorbance was measured using a microplate reader (n=44). Statistical assessments were made with 1-way ANOVA followed by the Tukey post hoc test with Bonferroni adjustment (α=.05). Results The hybrid group recorded the highest mean value of flexural strength 135.51 MPa, showing a significant difference compared with that of the control group ( P =.022). Regarding color, the mean ∆E 00 for titanium was 1.18, for chitosan was 4.26, and for the hybrid group was 3.23 ( P <.001). The optical density of the chitosan (2.42) was significantly higher than that of the titanium 1.36 ( P =.007) and that of the control 1.63 ( P =.042). Conclusions The incorporation of nanofillers resulted in an increase in flexural strength, but it adversely affected the color of nanocomposite resins. Antimicrobial efficacy was improved by incorporating titanium nanofillers.

The Effect of the Inorganic Nanomaterials on the UV-absorption, Rheological and Mechanical Properties of the Rapid Prototyping Epoxy-Based Composites

Effects of nanoparticles SiO2 on the performance of nanocomposites

One-step synthesis of improved silica/epoxy nanocomposites with inorganic-organic hybrid network

Effect of Nano SiO 2 Particles on the Morphology and Mechanical Properties of POSS Nanocomposite Dental Resins

Preparation and properties of UV curable SiO<inf>2</inf>/Epoxy resin composite

Development of New TiO2 Nanoparticles Modified Photosensitive Resin for Rapid Prototyping

Preparation and properties of UV curable SiO<sub>2</sub>/Epoxy resin composite

Effects of Nanoparticles on Hygrothermal Property of Epoxy Resin Composites

Carbon Nanoparticles’ Impact on Processability and Physical Properties of Epoxy Resins—A Comprehensive Study Covering Rheological, Electrical, Thermo-Mechanical, and Fracture Properties (Mode I and II)

Effect of nanomodified 3D printed photopolymerizable resin on flexural strength, color, and antimicrobial efficacy: An in vitro study

Fabrication and Evaluation of Light-Curing Nanocomposite Resins Filled with Surface-Modified TiO2 Nanoparticles for Dental Application

Influence of nanoparticle size on the mechanical and tribological characteristics of TiO 2 reinforced epoxy composites

Performance of Novel Engineered Materials from Epoxy Resin with Modified Epoxidized Natural Rubber and Nanocellulose or Nanosilica

Structure-property relationship of nano enhanced stereolithography resin for desktop SLA 3D printer

Tailoring the Mechanical Performance of Epoxy Resin by Various Nanoparticles

A Study on the Application Performance of High-Aspect-Ratio Nano-Ettringite in Photocurable Resin Composites

Effect of the Filler Structure of Carbon Nanomaterials on the Electrical, Thermal, and Rheological Properties of Epoxy Composites

Mechanical Properties of Epoxy and Its Carbon Fiber Composites Modified by Nanoparticles

Chemical and Mechanical Characterization of Unprecedented Transparent Epoxy–Nanomica Composites—New Model Insights for Mechanical Properties

Design of Resin Composites with Enhanced Physical–mechanical Properties

Synthesis and mechanical properties of the epoxy resin composites filled with sol−gel derived ZrO 2 nanoparticles