Abstract:This work aims to investigate the performance of the epoxy resin modified by poly(ethylene glycol)‐b‐poly(propylene glycol)‐b‐poly(ethylene glycol) (PEO‐PPO‐PEO) block copolymers and multi‐walled carbon nanotubes (MWCNTs). It is detected that when PEO‐PPO‐PEO block copolymers and MWCNTs are simultaneously added, synergistic toughening effects for epoxy resin achieve without loss of other properties. Specifically, with the introduction of 5 wt% PEO‐PPO‐PEO block copolymers, the critical stress intensity factor (KIc) of the epoxy resin is increased by 65.7% in contrast with the pure epoxy resin by the reason of the epoxy matrix shear yielding triggered by cavitation of PEO‐PPO‐PEO nanophases and by 28.7% with the introduction of 0.25 wt% MWCNTs owing to the pull‐out and crack bridging of MWCNTs, but other properties are decreased. However, with the simultaneous introduction of 5 wt% PEO‐PPO‐PEO and 0.25 wt% MWCNTs, the KIc of epoxy resins is significantly increased by 97.3%, exhibiting much higher than the linear superposition of the corresponding epoxy resin/PEO‐PPO‐PEO and epoxy resin/MWCNTs composites. Meanwhile, the decrease in other properties is retarded. This is because PEO‐PPO‐PEO block copolymer can enhance the interactions between MWCNTs and epoxy resins in the epoxy resin/PEO‐PPO‐PEO/MWCNT composites, thereby promoting the dispersion of MWCNTs in the epoxy resins. Consequently, the fracture toughness of epoxy resins is efficiently boosted by the superposition of the pull‐out and crack bridging of well‐dispersed MWCNTs and the epoxy matrix shear yielding triggered by the strengthened interactions between PEO‐PPO‐PEO block copolymers and MWCNTs. This work supplies an easy and efficient means to solve the dispersion of nanoparticles, which can prominently advance the comprehensive properties of epoxy resins.

Enhanced mechanical and photocatalytic performances of epoxy nanocomposites filled with potassium‐modified graphitic carbon nitride nanosheets

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Cation–π interaction assisted facile preparation of graphene/epoxy nanocomposites with superior strength and toughness

In situ preparation of functionalized graphene oxide/epoxy nanocomposites with effective reinforcements

Preparation and properties of carbon‐based epoxy nanocomposites: Dynamic mechanical, dielectric, and thermal properties

Significantly Strengthening Epoxy by Incorporating Carbon Nanotubes/Graphitic Carbon Nitride Hybrid Nanofillers

Functionalised Multi‐walled Carbon Nanotubes for Epoxy Nanocomposites with Improved Performance

Sustainable epoxy nanobiocomposites reinforced with lignin nanoparticles for enhanced UV resistance and mechanical properties

Synergistic Effect of CNT Films Impregnated with CNT Modified Epoxy Solution Towards Boosted Interfacial Bonding and Functional Properties of the Composites

Enhancing mechanical properties of an epoxy resin using “liquid nano-reinforcements”

Effects of carbon nanotube functionalization on the mechanical and thermal properties of epoxy composites

Preparation of flame retardant and conductive epoxy resin composites by incorporating functionalized multi‐walled carbon nanotubes and graphite sheets

Enhanced mechanical properties of epoxy nanocomposites by mixing noncovalently functionalized boron nitride nanoflakes.

Synergistically enhanced performance of epoxy resin by block copolymer and multi‐walled carbon nanotubes

Optimized Functionalization of Graphene Oxide for Enhanced Mechanical Properties in Epoxy Resin Composites

Studies on Organic-Inorganic Interpenetrating Network Nanocomposites Based on Mesoporous Molecular Sieve MCM-41

Preparation and functional study of epoxy composites reinforced with ultra-low content single-walled carbon nanotubes

Molecular Dynamics Analysis of Surface-Modified Carbon Nanoparticle Reinforced Epoxy Resin

Natural Inorganic Nanotubes Reinforced Epoxy Resin Nanocomposites

Synergistic effect of functionalized graphene oxide and carbon nanotube hybrids on mechanical properties of epoxy composites

Control of the Functionality of Graphene Oxide for Its Application in Epoxy Nanocomposites