Abstract:This work provides a new comprehensive assessment method to determine the complex mechanical interaction of adjacent corrosion defects. Firstly, a three-dimensional (3D) finite element model of pipelines containing adjacent defects (involving longitudinally aligned, circumferentially aligned, and diagonally aligned defects) was developed and validated by full-scale burst tests. Then, the synergistic stress interaction between adjacent defects was analyzed, and the relationship between the burst position of the pipeline and defect spacing was determined. At last, the applicability of several commonly used critical spacing rules for identifying the interaction between adjacent defects was compared and discussed in detail. The results show that the failure position of the pipeline containing adjacent defects is related to the relative position of defects. For longitudinally aligned corrosion defects, the stronger the interaction between defects (i.e., the shorter the distance between two defects), the closer the failure position of the pipeline to the center of the defect spacing. For circumferentially aligned corrosion defects, the failure position of the pipe tends to move from the defect edge to the geometric center of the defect with increasing defect spacing. For diagonally aligned defects, the failure position is generally located on the path connecting the defect and the spacing. The currently available evaluation criteria for identifying circumferentially interacting defects display the most accuracy, and the identification effect of diagonally aligned defects is the poorest. In addition, the critical spacing rule proposed by Li presents the highest precision in identifying the interacting defects. The results are expected to provide a stress synergistic failure assessment method for pipelines containing cluster corrosion defects in engineering.

Interaction of multiple corrosion defects on burst pressure of pipelines

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Assessment by finite element modeling of the interaction of multiple corrosion defects and the effect on failure pressure of corroded pipelines

Assessment of the interaction of corrosion defects on steel pipelines under combined internal pressure and longitudinal compression using finite element analysis

Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis

Effect of interaction between corrosion defects on failure pressure of thin wall steel pipeline

Mechanical synergistic interaction between adjacent corrosion defects and its effect on pipeline failure

Burst capacity analysis of pipeline with multiple longitudinally aligned interacting corrosion defects subjected to internal pressure and axial compressive stress

Study on the effect of corrosion defects on VIV behavior of marine pipe using a new defective pipe element

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

Failure Pressure Analysis of the Pipe with Inner Corrosion Defects by FEM

Experimental and numerical studies on collapse of subsea pipelines with interacting corrosion defects

Effects of Ellipsoidal Corrosion Defects on Failure Pressure of Corroded Pipelines Based on Finite Element Analysis

Burst strength analysis of pressurized steel pipelines with corrosion and gouge defects

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Pipeline condition assessment and finite element modeling of mechano-electrochemical interaction between corrosion defects with varied orientations on pipelines

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Burst Pressure Prediction of Pipes With Internal Corrosion Defects

Failure Pressure Estimation of Corroded Pipeline with Different Depths of Interacting Defects Subjected to Internal Pressure

On the Influence of Interacting Dual Defects on the Collapse Pressure of Pipes under External Pressure