Abstract:An approach for the realization of radiofrequency (RF)/microwave balanced filters with simultaneous differential-mode (DM) and common-mode (CM) two-port-reflectionless behavior for bandpass, quasi-bandstop, and dual-passband applications is reported. These RF filtering components exploit as basic constituent circuit block a type of two-layer broadband magic-T, in which its two-side $/$ coplanar arms are designed as the balanced feeding ports at the top layer. Specifically, two replicas of this wideband magic-T on a microstrip-to-slotline transition are back-to-back connected between their $\bm{\Delta}$ terminals by means of a double-complementary-diplexer-based single-ended low-reflection filtering unit inserted at the bottom layer. In addition, their $\bm{\Sigma}$ accesses are loaded with a resistor to perform the CM RF-power-absorption functionality. Thus, balanced symmetrical-absorptive RF filtering devices for both the DM and CM operations are developed. Such distinctive feature makes this family of microwave filters unique since most of related prior-art balanced filters mainly focused on obtaining the RF-power-absorption property only for the DM or the CM. The theoretical operational foundations and RF design principles of the engineered class of balanced filters with double DM and CM symmetrical-absorptive capabilities are described. Furthermore, their two-layer implementations exemplified in second-and fourth-order bandpass filters (BPFs), a second-order quasi-bandstop filter (BSF), and a second-order dual-band BPF are presented. For experimental-validation purposes, three different prototypes centered around 2 GHz corresponding to single-band BPF and quasi-BSF devices, as well as a dual-band BPF circuit with passbands located at 1.75 and 2.25 GHz, are manufactured and tested. For all these prototypes, 10-dB-referred DM and CM two-port-RF-power-absorption relative spectral ranges larger than 3:1 are measured. Their expected RF filtering functionalities and highly suppressed CM transmission at all frequencies are also verified.

Advanced Evaluation of Minimum Insertion Loss of Power-Line EMI/RFI Filters in RF and Microwave Frequency Bands

Specifying Power Filter Insertion Loss Values in Terms of Electromagnetic Safety of IT Equipment

Microwave Linear-phase Microstrip Filters Using Ring Resonators

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Analysis of the Insertion Loss of the EMI Filter

Design and modelling of a cost-effective embedded filter for low-impedance power distribution network

3 Kw Completely-Integrated EMI Filter Based on Flexible Multi-layer Foil

Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

Design of EMI Filter for Suppressing High Frequency Electromagnetic Emissions

EMI Filter Design with Passive Components for Power Lines

Implementation of a Wideband Microwave Filter Design with Dual Electromagnetic Interference (EMI) Mitigation for Modern Wireless Communication Systems with Low Insertion Loss and High Selectivity

Analysis of Insertion Loss and Impedance Compatibility of Hybrid EMI Filter Based on Equivalent Circuit Model.

Microwave filters-applications and technology

EMC Simulation of a Power Filter in the Automotive Area

Stray Electromagnetic Coupling Effect in a Power Line EMI Filter

Two-Layer-Magic-T-Based Bandpass, Quasi-Bandstop, and Dual-Passband Balanced Filters With Differential-/Common-Mode Reflectionless Behavior

Millikelvin thermal and electrical performance of lossy transmission line filters

Modeling Strategy for EMI Filters

Comprehensive Comparison of Physical and Behavioral Approaches for Virtual Prototyping and Accurate Modeling of Three-Phase EMI Filters

Study on the EMI filters to EFT/B tests in power converters