Abstract:Because of the inherent high-temperature resistance, the application of ZrO2 nanofiber aerogels in thermal insulation is promising. However, the contradiction between mechanical and thermal insulation properties has limited its applications. In the present work, nanofiber aerogels of ZrO2/SiO2/C with enhanced thermal insulation and compressive strength were successfully prepared by freeze-casting using tetraethoxysilane (TEOS) as a binder. The effect of TEOS content on the microstructure, compressive and thermal insulation properties was investigated. The porosity of the fabricated aerogels is higher than 97.3 %. The pore structure exhibits hierarchical characteristics, with honeycomb pores on the micro-scale and mesopores on the nano-scale. Part of the SiO2 phases generated by TEOS hydrolysis bond ZrO2 nanofiber to form fiber junctions, while the others cover the surface of ZrO2 nanofibers forming core-shell structure. With the increase of TEOS content, ZrO2/SiO2/C nanofiber aerogels showed a slightly decrease in thermal conductivity to a lower value of 0.032 W m-1 K-1 and an increase in compressive stress to 11.9 KPa. The thermal insulation mechanism and deformation mode during compression of aerogels were analyzed. This study not only provide ZrO2/SiO2/C nanofiber aerogels with both enhanced mechanical and thermal insulation properties, but also can guide the design and fabrication of other ceramic aerogels with excellent properties.

Novel Al2O3–SiO2 aerogel/porous zirconia composite with ultra-low thermal conductivity

Novel Al 2 O 3 –sio 2 Aerogel/porous Zirconia Composite with Ultra-Low Thermal Conductivity

Novel Nanoporous Silica Aerogel Impregnated Highly Porous Ceramics with Low Thermal Conductivity and Enhanced Mechanical Properties

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

ZrO2/SiO2/C Nanofiber Aerogels with Enhanced Mechanical and Thermal Insulation Properties Fabricated by Freeze Casting

Experimental Characterization of the Thermal Conductivity and Microstructure of Opacifier-Fiber-Aerogel Composite

Porous yttria-stabilized zirconia ceramics with low thermal conductivity via a novel foam-gelcasting method

Construction and Properties of Ultralow Thermal Conductivity and High Strength Zirconia Aerogel Composites by Freeze-Drying

Fabrication and Properties of Fibrous Porous Mullite–zirconia Fiber Networks with a Quasi-Layered Structure

Preparation of La2Zr2O7 composite SiO2 aerogels and their fiber-reinforced materials for thermal insulation applications

Low sintering shrinkage and high strength of porous mullite–zirconia ceramics: Effect of AlF3 and ZrSi2 contents

SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation

Fabrication of Al2O3 aerogel-SiO2 fiber composite with enhanced thermal insulation and high heat resistance

Preparation and Characterization of C/Al 2 O 3 Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Design and preparation of novel Y2O3-SiO2 composite aerogels for high-temperature thermal insulators

Porous Ysz Ceramics with Unidirectionally Aligned Pore Channel Structure: Lowering Thermal Conductivity by Silica Aerogels Impregnation

A Novel Silica Aerogel/porous Si3N4 Composite Prepared by Freeze Casting and Sol-Gel Impregnation with High-Performance Thermal Insulation and Wave-Transparent

Carbon-Fiber Felt Reinforced Carbon/Alumina Aerogel Composite Fabricated with High Strength and Low Thermal Conductivity

Facile preparation of ZrCO composite aerogel with high specific surface area and low thermal conductivity

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Porous yttria-stabilized zirconia ceramics with ultra-low thermal conductivity