Abstract:Deep underground engineering encounters substantial layered hard rock formations, and the engineering triaxial stress path involves an increase in maximum principal stress, constant intermediate principal stress, and a decrease in minimum principal stress. However, previous research has focused on rock layer angles under conventional triaxial stress conditions, disregarding the influence of foliation strike angles in engineering triaxial stress scenarios. This study experimentally investigates the effects of foliation strike angles on layered hard rock under an engineering triaxial stress path. To account for the brittleness of layered hard rock, we propose a specific small sample-processing method tailored to the foliation strike angle. True triaxial loading tests are conducted on steep, thin slate samples with two different loading orientations, accompanied by acoustic emission monitoring. Results indicate that the strength under a traditional true triaxial compression condition is similar for specimens with 90° and 0° strike angles. Stress–strain curves show that larger deformations occur perpendicular to bedding planes, while surface fractures propagate exclusively along the bedding planes. Mechanical responses differ significantly between specimens subjected to the engineering triaxial stress path at 0° and 90° strike angles compared to conventional true triaxial loading tests, with a lower bearing capacity and differentiated intermediate and minimum principal strains in the 0° case. Conversely, the 90° case exhibits a higher bearing capacity, consistent deformation, and more acoustic emission events. Numerical simulations comparing plastic zone sizes during actual underground excavation support these conclusions. These findings highlight the effects of foliation strike angles, favoring the 90° strike-angle configuration for excavation activities and providing enhanced stability in the surrounding rock mass.

Experimental Investigation of Laws during Deformation of Circular Roadway in 10° Inclined Layered Rock

Physical Model Test and Application of 3D Printing Rock-Like Specimens to Laminated Rock Tunnels

Experimental Study on Deformation Law of Rectangular Roadway in Horizontal Layered Rock Mass

Physical model test and numerical simulation on the failure mechanism of the roadway in layered soft rocks

Experimental Study Of Horizontal Strata Deep Rock Roadway Crack Propagation And Strength Criteria

Influences of foliation orientation and lateral stress difference on the deformation and fracturing of a thin-layered rock around underground excavations: insight from multi-axial loading tests

An Experimental Investigation on the Foliation Strike-Angle Effect of Layered Hard Rock under Engineering Triaxial Stress Path

Physical modelling of deformation and failure mechanisms and supporting effects for a deep-buried tunnel in inclined layered strata

Physical Experiment and Numerical Modelling of Tunnel Excavation in Slanted Upper-Soft and Lower-Hard Strata

Research on the law of internal deformation and cracking of circular tunnels under non-tectonic stress

Physical modeling investigation on deformation characteristic and roof instability mechanism of deep rectangular roadway in layered rock mass

Physical Modeling of an Underground Roadway Excavation in Vertically Stratified Rock Using Infrared Thermography

Support scheme optimization aimed at the asymmetric deformation of the supported rock in a deep tunnel

Research on the large deformation mechanism and control measures of a layered soft rock tunnel

Model experimental study of deformation and failure law in excavation of deep rock mass with multi-cleftiness of different angles

Experimental Study on Deformation and Failure Characteristics and Monitoring and Early Warning of Surrounding Rock of Tunnel Crossing Sliding Surface

Failure Mechanisms of Soft Rock Roadways in Steeply Inclined Layered Rock Formations

Model test study on large deformation mechanism of thin-bedded metamorphic sandstone tunnel

The Deformation and Failure Characteristics of Tunnels in Layered Rock with Gentle Dip Angles after Freeze–thaw Cycles: Physical Model Tests and Numerical Investigation

Deformation and Fracture of Circular Tunnels under Non-Tectonic Stresses and Its Support Control

Experimental Study on Deformation Failure Mechanism of Surrounding Rocks for the Deep-Buried Twin Tunnels in Inclined Layered Strata During the Excavation