Abstract:The perforated panels are widely used in noise control and loudspeaker systems. Besides the inner acoustic impedance of each aperture,the interactions among apertures have some effects on the acoustic impedance of the perforated panel. The previous studies on the acoustic impedance of the perforated panel use the following three methods:the simplified analytical methods,the experimental methods and the numerical methods. The aforesaid analytical methods and experimental methods are limited due to some special restrictions. Although the numerical methods can predict the acoustic impedance of the perforated panel accurately,it is not convenient in practical situations. A simple analytical model is proposed to simulate the acoustic impedance of the perforated panel. Considering each aperture in the perforated panel as a sound source,the total sound field radiated by the system is the sum of each individual sound field radiated by each aperture. The mutual radiation impedance between one aperture and other apertures is obtained on the basis of the self radiation impedance of the aperture. Then the total impedance of each aperture,including the inner impedance and the radiation impedance,can be obtained. And the total acoustic impedance of the perforated panel can be derived. The proposed model and the previous model are applied to simulate the acoustic impedances of two perforated panels with different perforations,and the differences between two models are compared. It is shown that when the frequency increases,the interactions among apertures become small,and the difference between the acoustic impedances calculated by two models decreases. It is also found that when the distance among apertures increases,the interactions among apertures become small. The equivalent circuit method is used to calculate the frequency responses of actual loudspeaker systems with the perforated panels in front of the loudspeakers,and the acoustic impedances of the perforated panels are calculated with both of the mentioned two models. The frequency responses of the actual loudspeaker systems are also measured in an anechoic chamber. For the loudspeaker system with a single aperture in the perforated panel,both of the simulated frequency responses are similar to the experimental results. For the loudspeaker system with three or seven apertures in the perforated panel,the simulated frequency response calculated by the proposed model is closer to the experimental result,and the other simulated frequency response calculated by the previous model diverges a lot from the experimental result,especially for the resonant frequency in the medium-high frequency range. And the resonant frequency is determined by the acoustic reactance of the perforated panel and the acoustic compliance of the front cavity. It is confirmed that the proposed model is more accurate as the interactions among apertures have large effects on the acoustic impedance of the perforated panel when the distance between apertures is not large.

Measurement of Acoustic Impedance and Sound Absorption Performance of a Perforated Plate with a Backing Cavity at a High Sound Pressure Level

Study on sound pressure level and acoustic damping ratio of one dimensional sound field partitioned by perforated plate with geometric similarity

Acoustic behaviour of micro-perforated panel backed by shallow cavity under fully developed grazing flow

Experimental Study on the Mid-Frequency Sound Absorption Performance of Multiple Aperture Dual Perforated Plates Traversed by Bias Flow

Application of the Perforated Plate in Passive Control of the Nonpremixed Swirl Combustion Instability under Acoustic Excitation

Low-frequency Sound Absorptive Properties of Dual Perforated Plates under Bias Flow

Sound Absorption of a Finite Micro-Perforated Panel Backed by a Shunted Loudspeaker.

Diffuse Sound Absorptive Properties of Parallel-Arranged Perforated Plates with Extended Tubes and Porous Materials

Geometric Shapes Effect of In-Duct Perforated Orifices on Aeroacoustics Damping Performances at Low Helmholtz and Strouhal Number.

Study on the Acoustic Performance of Perforated Duct Muffler

On the variations of acoustic absorption peak with flow velocity in Micro-Perforated Panels at high level of excitation

A study on the acoustic impedance model of perforated panels

Experimental investigation of perforations interactions effects under high sound pressure levels

Acoustic Impedance of Perforated Plate with Grazing Flow

Broaden the sound absorption band by using micro-perforated plate back cavities with different cross-sectional areas

A study of low frequency sound insulation mechanism of a perforated plate-type acoustic metamaterial

Sound Transmission Through a Finite-Sized Double Panel Cavity with a Micro-Perforated Panel Insertion

On the level-dependent attenuation of a perforated device

Testing the absorption coefficient of 3D printed perforated panels

Analysing the Impact of 3D-Printed Perforated Panels and Polyurethane Foam on Sound Absorption Coefficients

Transmission Loss Analysis of Thick Perforated Plates for Valve Contained Pipelines