Abstract:The perforated panels are widely used in noise control and loudspeaker systems. Besides the inner acoustic impedance of each aperture,the interactions among apertures have some effects on the acoustic impedance of the perforated panel. The previous studies on the acoustic impedance of the perforated panel use the following three methods:the simplified analytical methods,the experimental methods and the numerical methods. The aforesaid analytical methods and experimental methods are limited due to some special restrictions. Although the numerical methods can predict the acoustic impedance of the perforated panel accurately,it is not convenient in practical situations. A simple analytical model is proposed to simulate the acoustic impedance of the perforated panel. Considering each aperture in the perforated panel as a sound source,the total sound field radiated by the system is the sum of each individual sound field radiated by each aperture. The mutual radiation impedance between one aperture and other apertures is obtained on the basis of the self radiation impedance of the aperture. Then the total impedance of each aperture,including the inner impedance and the radiation impedance,can be obtained. And the total acoustic impedance of the perforated panel can be derived. The proposed model and the previous model are applied to simulate the acoustic impedances of two perforated panels with different perforations,and the differences between two models are compared. It is shown that when the frequency increases,the interactions among apertures become small,and the difference between the acoustic impedances calculated by two models decreases. It is also found that when the distance among apertures increases,the interactions among apertures become small. The equivalent circuit method is used to calculate the frequency responses of actual loudspeaker systems with the perforated panels in front of the loudspeakers,and the acoustic impedances of the perforated panels are calculated with both of the mentioned two models. The frequency responses of the actual loudspeaker systems are also measured in an anechoic chamber. For the loudspeaker system with a single aperture in the perforated panel,both of the simulated frequency responses are similar to the experimental results. For the loudspeaker system with three or seven apertures in the perforated panel,the simulated frequency response calculated by the proposed model is closer to the experimental result,and the other simulated frequency response calculated by the previous model diverges a lot from the experimental result,especially for the resonant frequency in the medium-high frequency range. And the resonant frequency is determined by the acoustic reactance of the perforated panel and the acoustic compliance of the front cavity. It is confirmed that the proposed model is more accurate as the interactions among apertures have large effects on the acoustic impedance of the perforated panel when the distance between apertures is not large.

On the level-dependent attenuation of a perforated device

An Improved Lumped Parameter Model Predicting Attenuation of Earmuff with Air Leakage

Transmission Loss Analysis of Thick Perforated Plates for Valve Contained Pipelines

A study on the acoustic impedance model of perforated panels

Calculation model of transmission loss for arrayed elements dissipative silencers

Sound Absorption of Porous Materials Perforated with Holes Having Gradually Varying Radii

Modified Theory of a Microperforated Panel with Roughened Perforations

An experimental study of the nonlinear acoustic properties of a double-layer perforated panel resonator under broad-band noise excitations

Computational Analysis of the Influence of the Perforated Plate on Sandwich Transducer in Sound Radiation Performance

Acoustic attenuation prediction and analysis of perforated hybrid mufflers with non-uniform flow based on frequency domain linearized Navier-Stokes equations

Experimental investigation of perforations interactions effects under high sound pressure levels

A study of low frequency sound insulation mechanism of a perforated plate-type acoustic metamaterial

Sound Absorption of a Perforated Panel Backed with Perforated Porous Material: Energy Dissipation of Helmholtz Resonator Cavity

Experimental and Frequency-Domain Study of Acoustic Damping of Single-Layer Perforated Plates

A preliminary study of the acoustic attenuation of a thin acoustic liner

A Multiscale Theoretical Approach for the Sound Absorption of Slit-Perforated Double Porosity Materials

Influence of perforation and sound-absorbing material filling on acoustic attenuation performance of three-pass perforated mufflers

Sound Transmission Through a Finite-Sized Double Panel Cavity with a Micro-Perforated Panel Insertion

Broaden the sound absorption band by using micro-perforated plate back cavities with different cross-sectional areas

A Semi-Empirical Model for Sound Absorption by Perforated Plate Covered Open Cell Foam and Improvements from Optimising the Perforated Plate Parameters

An investigation on the acoustic impedance of a viscously damped micro-perforated rectangular membrane