Abstract:The perforated panels are widely used in noise control and loudspeaker systems. Besides the inner acoustic impedance of each aperture,the interactions among apertures have some effects on the acoustic impedance of the perforated panel. The previous studies on the acoustic impedance of the perforated panel use the following three methods:the simplified analytical methods,the experimental methods and the numerical methods. The aforesaid analytical methods and experimental methods are limited due to some special restrictions. Although the numerical methods can predict the acoustic impedance of the perforated panel accurately,it is not convenient in practical situations. A simple analytical model is proposed to simulate the acoustic impedance of the perforated panel. Considering each aperture in the perforated panel as a sound source,the total sound field radiated by the system is the sum of each individual sound field radiated by each aperture. The mutual radiation impedance between one aperture and other apertures is obtained on the basis of the self radiation impedance of the aperture. Then the total impedance of each aperture,including the inner impedance and the radiation impedance,can be obtained. And the total acoustic impedance of the perforated panel can be derived. The proposed model and the previous model are applied to simulate the acoustic impedances of two perforated panels with different perforations,and the differences between two models are compared. It is shown that when the frequency increases,the interactions among apertures become small,and the difference between the acoustic impedances calculated by two models decreases. It is also found that when the distance among apertures increases,the interactions among apertures become small. The equivalent circuit method is used to calculate the frequency responses of actual loudspeaker systems with the perforated panels in front of the loudspeakers,and the acoustic impedances of the perforated panels are calculated with both of the mentioned two models. The frequency responses of the actual loudspeaker systems are also measured in an anechoic chamber. For the loudspeaker system with a single aperture in the perforated panel,both of the simulated frequency responses are similar to the experimental results. For the loudspeaker system with three or seven apertures in the perforated panel,the simulated frequency response calculated by the proposed model is closer to the experimental result,and the other simulated frequency response calculated by the previous model diverges a lot from the experimental result,especially for the resonant frequency in the medium-high frequency range. And the resonant frequency is determined by the acoustic reactance of the perforated panel and the acoustic compliance of the front cavity. It is confirmed that the proposed model is more accurate as the interactions among apertures have large effects on the acoustic impedance of the perforated panel when the distance between apertures is not large.

Computational Analysis of the Influence of the Perforated Plate on Sandwich Transducer in Sound Radiation Performance

Sound absorption performance of a micro-perforated plate sandwich structure based on selective laser melting

A study of low frequency sound insulation mechanism of a perforated plate-type acoustic metamaterial

Analytical study for oblique wave interaction with a submerged horizontal perforated plate near a partially reflecting vertical wall

Optimization design and analysis of honeycomb micro-perforated plate broadband sound absorber

Broaden the sound absorption band by using micro-perforated plate back cavities with different cross-sectional areas

Transmission Loss Analysis of Thick Perforated Plates for Valve Contained Pipelines

A study on the acoustic impedance model of perforated panels

Sound absorption performance of micro-perforated plate sandwich structure based on triply periodic minimal surface

Acoustic Impedance of Perforated Plate with Grazing Flow

Aerodynamics Analysis of Superheated Steam Flow Through Multi-Stage Perforated Plates

Sound radiation from plates with elastic boundary conditions embedded in an infinite perforated rigid baffle

Influence of perforation and sound-absorbing material filling on acoustic attenuation performance of three-pass perforated mufflers

3D numerical investigation of energy transfer and loss of cavitation flow in perforated plates

Sound Transmission Through a Finite-Sized Double Panel Cavity with a Micro-Perforated Panel Insertion

An investigation on the acoustic impedance of a viscously damped micro-perforated rectangular membrane

Enhanced Low-Frequency Sound Absorption of a Porous Layer Mosaicked with Perforated Resonator

Study on the Acoustic Performance of Perforated Duct Muffler

Finite Element Analysis on Acoustic and Mechanical Performance of Flexible Perforated Honeycomb-Corrugation Hybrid Sandwich Panel

Improvement of the sound absorption performance of sandwich panel using inhomogeneous micro-perforations

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers