Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Megapixel multi-elemental imaging by Laser-Induced Breakdown Spectroscopy, a technology with considerable potential for paleoclimate studies

Multi-Elemental Mapping of A Speleothem Using Laser-Induced Breakdown Spectroscopy

2D geochemical imaging of biogenic marine carbonates using LA-TOF-ICP-MS at 1 and 2 μm pixel resolution

Ultrafast μLIBS imaging for the multiscale mineralogical characterization of pegmatite rocks

Integrated quantitative PIXE analysis and EDX spectroscopy using a laser-driven particle source

Fast High-Resolution Multi-Elemental Mapping of Phosphate Pellets Using Laser Induced Breakdown Spectroscopy

Three-dimensional Topographic and Multi-Elemental Mapping by Unilateral-Shift-subtracting Confocal Controlled LIBS Microscopy

Laser Desorption Time-of-Flight Mass Spectrometer for Sub-Micrometer-Scale Mass Spectrometry Imaging Using Near-Field Optics Technique

Miniaturized confocal Raman and Laser-induced breakdown spectroscopy imaging system based on micro-electro-mechanical mirror

Multiwavelength Ablation/Ionization and Mass Spectrometric Analysis of 1.88 Ga Gunflint Chert

Nanoscale Chemical Imaging by Photo‐Induced Force Microscopy: Technical Aspects and Application to the Geosciences

Portable confocal-controlled LIBS microscopy for topographic and LIBS mapping

Development of a Micro-Joule Portable LIBS System and the Preliminary Results for Mineral Recognition

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Parametric Study of Spot Size and Multi-Elemental Quantification of Geomaterials under Complex Matrix Conditions Using Fiber-Optic Laser-Induced Breakdown Spectroscopy

Elemental imaging using laser-induced breakdown spectroscopy: A new and promising approach for biological and medical applications

Toward Quantitative Analysis of Trace Element in Speleothems Using Laser-Induced Breakdown Spectroscopy

Advanced portable micro-SORS prototype coupled with SERDS for heritage science

High spatial resolution trace element determination of geological samples by laser ablation quadrupole plasma mass spectrometry: implications for glass analysis in volcanic products

New Approach for Near-Real-Time Measurement of Elemental Composition of Aerosol Using Laser-Induced Breakdown Spectroscopy

Semi-Quantitative Analysis of Geological Samples Using Laser Plasma Time-Of-Flight Mass Spectrometry