Abstract:Cracking in asphalt pavements is the net result of fracture and healing. The ability to accurately measure and predict the appearance of cracking depends on being able to determine the material properties that govern the rate of development of these two contrary aspects of cracking. This study is devoted to identifying the datum material properties in undamaged samples. It will make use of viscoelastic formulations and of well-known mechanics concepts the way in which these properties are altered by the composition of the mixture. Also introduced in this study is a process that makes extensive use of the pseudo-strain concept in decomposing the strain components. One of the many benefits of this approach is the ability to measure the fatigue endurance limit of an asphalt mixture with a simple test that requires only half an hour. The study begins with a detailed discussion of these concepts and properties and the test methods that simply and accurately measure them. One of the great advantages of using mechanics is that it provides a rapid and efficient way to predict the rate of appearance of the two aspects of pavement cracking, fracture and healing. Mechanics requires the use of material properties. An accurate and efficient determination of undamaged material properties is fundamental and important to the prediction of the performance of asphalt mixtures. It is found that the undamaged properties of an asphalt mixture are different when they are loaded in tension or in compression and this distinction is important. This study addresses the efficiency of the laboratory testing methods, and the effects of the volumetric material components and environmental factors such as temperature and ageing on the undamaged material properties. It also introduces the non-destructive tests that must be made in order, subsequently, to measure the damaged properties of the same materials.

Development of a Modified Adhesion Test for Hot-Poured Asphalt Crack Sealants

Development of a composite specimen interface cracking (CSIC) test for top-down cracking

Test Method to Evaluate the Effect of Interface Bond Conditions on Top-Down and Reflective Cracking

Effects of polymer modified asphalt emulsion (PMAE) on pavement reflective cracking performance

Evaluation of Asphalt Rubber Membrane Interlayer (ARMI) Using the University of Florida's Composite System Interface Cracking (CSIC) Test

Research On The Crack Resistance Of The High-Viscosity Emulsified Asphalt Sand Seal

Study on the Cohesion and Adhesion of Hot-Poured Crack Sealants

Characteristics of Undamaged Asphalt Mixtures in Tension and Compression

Study on mechanical properties of AR-SAMI

Improved Methodology to Evaluate Fracture Properties of Warm-Mix Asphalt Using Overlay Test

Investigation of the High-Temperature and Rheological Properties for Asphalt Sealant Modified by SBS and Rubber Crumb

Characterization of Hot-Applied Joint Sealants and Their Components in Terms of Their Chemical Composition and Basic Performance Properties

DEVELOPMENT AND APPLICATION OF LOW TEMPERATURE PERFORMANCE TESTER OF SEALANT MATERIAL FOR PAVEMENT

Investigation on Preparation and Properties of Crack Sealants Based on CNTs/SBS Composite-Modified Asphalt

Cohesive Property Evaluation of Crack Sealants Using a Low-Temperature Tensile Tester

Test Method on Adhesive Property of Joint Sealant in Supporting Layer of Ballastless Slab Track

Mechanical and Functional Self-Healing Characteristics of Hot-Poured Crack Sealant Exploiting Dynamic Shear Rheometer and Low-Temperature Tensile Tester

Using a Polymer-Based Sealant Material to Make Crack Repair of Asphalt Pavement

Comprehensive Laboratory Evaluation of Crack Resistance for an Asphalt Rubber Stress-Absorbing Membrane Interlayer (AR-SAMI)

Effect of Installation Parameters on Performance of Hot-Poured Crack Sealants

Performance evaluation of prepared gelled hot sealant in cold climates