Abstract:Organic electroactive materials, particularly semiconducting polymers, are at the forefront of emerging organic electronics. Among the plethora of unique features, the possibility to formulate inks out of these materials is particularly promising for the large‐scale manufacturing of electronics at lower cost on a variety of soft substrates. While solution deposition of semiconducting materials is promising for developing printed electronics, the environmental footprint of the materials and related devices needs to be considered to achieve sustainable manufacturing. Towards the development of greener printed electronics, this work investigates the utilization of a non‐toxic, environmentally‐friendly solvent, namely branched polyethylene (BPE), to formulate semiconducting inks. Focusing on a diketopyrrolopyrrole‐based (DPP) semiconducting polymer, shellac as dielectric, and BPE as the solvent, solutions were prepared in different concentrations and their rheological properties were characterized. Then, printing on polyethylene terephthalate (PET) substrates using two different techniques was performed to fabricate organic field‐effect transistors (OFETs). Both printing techniques yielded OFETs with good performance and device characteristics, averaging approximately 10−2 and 10−4 cm2 V−1 s−1, respectively, for slot‐die coating and direct‐ink writing deposition. Notably, despite some difference in threshold voltages, OFETs produced via slot‐die coating and direct‐ink writing showed comparable charge mobilities to previously reported OFETs prepared from similar materials, particularly those prepared on silicon dioxide wafers. Overall, this work confirms the suitability of BPE to formulate semiconducting inks to develop printed electronics in a greener manner. The printing methodology developed in this work also open new avenues for the design of functional printed electronics and related technologies.

Inkjet Etching of Polymers and Its Applications in Organic Electronic Devices

Recent progress in non-photolithographic patterning of polymer thin films

Interphase-Controlled Inkjet Printing of MicroInlaid OLEDs: Effects of Solvent- and Solute-Polymer Interactions

Polymer field-effect transistors with inkjet-printed silver electrodes: from device fabrication to circuit simulation

Interfaces and pattern resolution of inkjet-printed organic light-emitting diodes with a novel hole transport layer

Solvent Inkjet Printing Process for the Fabrication of Polymer Solar Cells

Fabrication of Patterned Polymer Resists for Ion Etching by Using Dewetting

Controlling the Surface Wettability of the Polymer Dielectric for Improved Resolution of Inkjet-Printed Electrodes and Patterned Channel Regions in Low-Voltage Solution-Processed Organic Thin Film Transistors

An Inkjet Printing Soft Photomask and Its Application on Organic Polymer Substrates

Inkjet Printing Multilayer OLEDs with High Efficiency Based on the Blurred Interface

Microstructural control over soluble pentacene deposited by capillary pen printing for organic electronics

Efficient Conjugated-Polymer Optoelectronic Devices Fabricated by Thin-Film Transfer-Printing Technique

Leveling and Drying Dynamics of Printed Liquid Films of Organic Semiconductor Solutions in OLED/OPV Applications

Patterning of organic semiconductor crystal arrays via microchannel-assisted inkjet printing for organic field-effect transistors

Inkjet printing technology and conductive inks synthesis for microfabrication techniques

Fabrication of a Polymer Nano Nozzle for Electrohydrodynamic Small-Molecule Solvent Inkjet Printing

Perovskite and Organic Solar Cells Fabricated by Inkjet Printing: Progress and Prospects

Printing organic‐field effect transistors from semiconducting polymers and branched polyethylene

Tailoring ink-substrate interactions via thin polymeric layers for high-resolution printing

Inkjet printing of pixel arrays: Droplet formation and pattern uniformity of a non-aqueous ink with tunable viscosity

Facile Direct Printing of DPP-Based Polymers for Organic Field-Effect Transistors and Logic Gates