Abstract:Organic field‐effect transistors (OFETs) based on two‐dimensional (2D) monolayer organic semiconductors (OSC) have demonstrated promising potentials for various applications, such as light emitting diode (LED) display drivers, logic circuits, and wearable electrocardiography (ECG) sensors. To date, the fabrications of this class of highly crystallized 2D organic semiconductors (OSC) are dominated by solution shearing. As these organic active layers are only a few molecular layers thick, their compatibilities with conventional thermal evaporated top electrodes or sophisticated photolithography patterning are very limited, which also restricts their device density. Here, we develop an electrode transfer stamp and a semiconductor patterning stamp to fabricate OFETs with channel lengths down to 3 μm over a large area without using any chemicals or causing any damage to the active layer. Two‐dimensional (2D) 2,9‐didecyldinaphtho[2,3‐b:2′,3′‐f]thieno[3,2‐b]thiophene (C10‐DNTT) monolayer OFETs developed by this new approach shows decent performance properties with a low threshold voltage (VTH) less than 0.5 V, intrinsic mobility higher than 10 cm2 V−1 s−1 and a subthreshold swing (SS) less than 100 mV dec−1. The proposed patterning approach is completely comparable with ultra‐flexible parylene substrate less than 2 μm thick. By further reducing the channel length down to 2 μm and using the monolayer OFET in an AC/DC rectifying circuit, the measured cutoff frequency is up to 17.3 MHz with an input voltage of 4 V. The newly proposed electrode transfer and patterning stamps have addressed the long‐lasting compatibility problem of depositing electrodes onto 2D organic monolayer and the semiconductor patterning. It opens a new path to reduce the fabrication cost and simplify the manufacturing process of high‐density OFETs for more advanced electronic or biomedical applications. This article is protected by copyright. All rights reserved

Controlling the Surface Wettability of the Polymer Dielectric for Improved Resolution of Inkjet-Printed Electrodes and Patterned Channel Regions in Low-Voltage Solution-Processed Organic Thin Film Transistors

Inkjet Printed Fine Silver Electrodes for All-Solution-Processed Low-Voltage Organic Thin Film Transistors

Facile Inkjet-Printing Self-Aligned Electrodes for Organic Thin-Film Transistor Arrays with Small and Uniform Channel Length

Improved Performance of Inkjet-Printed Ag Source/drain Electrodes for Organic Thin-Film Transistors by Overcoming the Coffee Ring Effects

Directly Spin Coating a Low‐Viscosity Organic Semiconductor Solution Onto Hydrophobic Surfaces: Toward High‐Performance Solution‐Processable Organic Transistors

Enhanced Polymer Thin Film Transistor Performance by Carefully Controlling the Solution Self‐Assembly and Film Alignment with Slot Die Coating

Towards Low-Voltage Organic Thin Film Transistors (otfts) with Solution-Processed High-K Dielectric and Interface Engineering

Direct Patterning of Self‐Assembled Monolayers by Stamp Printing Method and Applications in High Performance Organic Field‐Effect Transistors and Complementary Inverters

Modification of polymer gate dielectrics for organic thin-film transistor from inkjet printing

Fluorosurfactant-Improved Wettability of Low-Viscosity Organic Semiconductor Solution on Hydrophobic Surfaces for High-Mobility Solution-Processed Organic Transistors

Optimized Coaxial Focused Electrohydrodynamic Jet Printing of Highly Ordered Semiconductor Sub-Microwire Arrays for High-Performance Organic Field-Effect Transistors.

High Resolution Inkjet Printed Oxide Thin Film Transistors with Self-Aligned Fine Channel Bank Structure.

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Wettability Control of Interfaces for High-Performance Organic Thin-Film Transistors by Soluble Insulating Polymer Films.

All-Organic Thin Film Transistor Circuits with Ink-Jet Printed Electrodes

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Patterning Liquid Crystalline Organic Semiconductors via Inkjet Printing for High‐Performance Transistor Arrays and Circuits

Top-Gate Dry-Etching Patterned Polymer Thin-Film Transistors with a Protective Layer on Top of the Channel

Flexible All-organic, All-solution Processed Thin Film Transistor Array with Ultrashort Channel

Air Stable High Resolution OFET (organic Field Effect Transistor) Fabrication Using Inkjet Printing and Low Temperature Selective Laser Sintering Process

Dry Lithography Patterning of Monolayer Flexible Field Effect Transistors by 2D Mica Stamping