Abstract:Organic electroactive materials, particularly semiconducting polymers, are at the forefront of emerging organic electronics. Among the plethora of unique features, the possibility to formulate inks out of these materials is particularly promising for the large‐scale manufacturing of electronics at lower cost on a variety of soft substrates. While solution deposition of semiconducting materials is promising for developing printed electronics, the environmental footprint of the materials and related devices needs to be considered to achieve sustainable manufacturing. Towards the development of greener printed electronics, this work investigates the utilization of a non‐toxic, environmentally‐friendly solvent, namely branched polyethylene (BPE), to formulate semiconducting inks. Focusing on a diketopyrrolopyrrole‐based (DPP) semiconducting polymer, shellac as dielectric, and BPE as the solvent, solutions were prepared in different concentrations and their rheological properties were characterized. Then, printing on polyethylene terephthalate (PET) substrates using two different techniques was performed to fabricate organic field‐effect transistors (OFETs). Both printing techniques yielded OFETs with good performance and device characteristics, averaging approximately 10−2 and 10−4 cm2 V−1 s−1, respectively, for slot‐die coating and direct‐ink writing deposition. Notably, despite some difference in threshold voltages, OFETs produced via slot‐die coating and direct‐ink writing showed comparable charge mobilities to previously reported OFETs prepared from similar materials, particularly those prepared on silicon dioxide wafers. Overall, this work confirms the suitability of BPE to formulate semiconducting inks to develop printed electronics in a greener manner. The printing methodology developed in this work also open new avenues for the design of functional printed electronics and related technologies.

Proving Scalability of an Organic Semiconductor To Print a TFT-Active Matrix Using a Roll-to-Roll Gravure

Fully Solution-Processed Flexible Organic Thin Film Transistor Arrays with High Mobility and Exceptional Uniformity

Transfer Printing As a Method for Fabricating Hybrid Devices on Flexible Substrates

Control of the coffee ring effect during R2R gravure printing for minimizing threshold voltage variation in printed carbon nanotube-based thin film transistors

High yield manufacturing of fully screen-printed organic electrochemical transistors

Scalable Fabrication of Highly Crystalline Organic Semiconductor Thin Film by Channel‐Restricted Screen Printing toward the Low‐Cost Fabrication of High‐Performance Transistor Arrays

The Influence Mechanism of Ink Viscosity on Ink Transfer Rates and Film Defects of the Roll-to-roll Printed Organic Photoactive Layers

Green Printing for Scalable Organic Photovoltaic Modules by Controlling the Gradient Marangoni Flow

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Printing organic‐field effect transistors from semiconducting polymers and branched polyethylene

Solution-printed organic semiconductor blends exhibiting transport properties on par with single crystals

Large Area Roll-to-roll Printed Semiconducting Carbon Nanotube Thin Films for Flexible Carbon-Based Electronics

Precise Patterning of Large‐Scale TFT Arrays Based on Solution‐Processed Oxide Semiconductors: A Comparative Study of Additive and Subtractive Approaches

Organic Electrochemical Transistors: From Lithography to Large‐Scale Printing

43.1: Invited Paper: Large‐area and High‐performance Printed Carbon Nanotube and Metal Oxide Thin Film Transistors and Their Applications

Driving Organic Field-Effect Transistors: Enhancing Crystallization and Electrical Performance with Blends and Inkjet Printing

Development of Materials and Printing Methods for Fabrication of Thin-Film Transistors on Flexible Substrates

Patterning Liquid Crystalline Organic Semiconductors via Inkjet Printing for High‐Performance Transistor Arrays and Circuits

Organic and carbon-based electronics printed onto flexible substrates

Printed Thin-Film Transistors with Functionalized Single-Walled Carbon Nanotube Inks

High-resolution continuous microcontact printing on various substrates for organic and oxide electronics