Abstract:Friction stir welding (FSW) technology combines heat input from friction and extreme plastic deformation to produce high-quality joints in aluminum and other alloy systems. This necessitates examining the final welded joint's mechanical and structural properties. Post-weld heat-treated AA6061-T6 alloy that resulted from the application of a Cu donor stir–assisted (CDSA) friction stir welding (FSW) material was examined for crystal structure and mechanical properties. CDSA FSW samples were tested at a constant tool rotational speed of 1400 rpm and a welding translational speed of 1 mm/s. CDSA samples of 20% and 60% thickness of the AA6061-T6 base alloy were selected to assist the FSW joining at the plunge stage. The FSW AA6061-T6 samples were solid solution treated at 540 °C for 1 h, followed by quenching in water at room temperature. The samples were then artificially aged at 180 °C for 6 h, respectively, followed by air cooling. The samples were tested for microstructure, crystal structure, chemical composition, and mechanical properties using optical microscopy, scanning electron microscopy, X-ray diffraction, and nanoindentation. The microstructure shows the additional grain refinement in the stir zone (SZ) due to recovery and recrystallization with increasing aging time. Examination of the chemical contents of the FSW AA6061-T6 alloy samples using scanning electron microscopy with energy-dispersive spectroscopy (EDS) revealed Al (parent material) as the predominant element, while Cu (CDSA) was minimally present as expected. XRD results of the CDSA FSW samples depicted crystal orientations similar to the orientations of the AA6061-T6 alloy. Nanoindentation tests revealed softening effects due to the dissolution of hardening precipitates at the SZ. The hardness of the base metal (BM), left and right regions, is reported as ~ 0.65 GPa, whereas at the SZ, the hardness is ~ 0.55 GPa at a depth of indentation of 4.7 μm.

Material stirring during FSW of Al–Cu: Effect of pin profile

Effect of Tool Pin Profile on Mechanical and Metallurgical Properties of the Friction Stir Welded Joint of AA6061 and AZ91D

Influence of additional heating in friction stir welding of dissimilar aluminum alloys with different tool pin profiles

Investigation of Mechanical Properties on Underwater Friction Stir Welded AA7075 With Pure Copper Dissimilar Joints

Studies on Effect of Tool Pin Profiles and Welding Parameters on the Friction Stir Welding of Dissimilar Aluminium Alloys AA5052 & AA6063

Effect of pin profile on microstructure and mechanical properties of friction stir spot welded Al-Cu dissimilar metals

Effect of Stirring Pin on Interfacial Microstructure and Mechanical Properties of FSSW-B Joint

Effect of Tool Profile Influence in Dissimilar Friction Stir Welding of Aluminium Alloys (AA5083 and AA7068)

The effect of pin diameter, tool penetration depth and plate arrangement on mechanical and metallurgical properties of 6061-T6 and 5052-T32 aluminum dissimilar joints in friction stir spot welding (FSSW)

A Simulation Study on Material Flow and Mixing Mechanism in Dissimilar Friction Stir Welding of AA6061 and AZ31 Alloys

Post-weld heat treatment effects on microstructure, crystal structure, and mechanical properties of donor stir–assisted friction stir welding material of AA6061-T6 alloy

The Influence of Tool Geometry on the Mechanical Properties and the Microstructure of AA6061-T6 Aluminum Alloy Friction Stir Spot Welding

Mechanical properties, microstructure, and fracture behavior of friction stir welded AA7075 joints with conical pin and conical threaded pin type tools

Evaluating the Microhardness Profiles in Friction Stir Welding of Dissimilar Alloys

Microstructure and XRD Analysis of FSW Joints for Copper T2/aluminium 5A06 Dissimilar Materials

Effects of Pin Thread on the In-Process Material Flow Behavior During Friction Stir Welding: A Computational Fluid Dynamics Study

Microstructure and Mechanical Properties Analysis of Al/Cu Dissimilar Alloys Joining by Using Conventional and Bobbin Tool Friction Stir Welding

Improving Joint Features and Mechanical Properties of Pinless Fiction Stir Welding of Alcald 2A12-T4 Aluminum Alloy

Exploring the influence of pin geometry on metallurgical and mechanical characteristics of dissimilar aluminum TIG welds via friction stir processing

Microstructure, microhardness and mechanical behavior of dissimilar AA7075/AA6061 alloys under friction stir welding

Effect of Stirring Pin Rotation Speed on Microstructure and Mechanical Properties of 2A14-T4 Alloy T-Joints Produced by Stationary Shoulder Friction Stir Welding