Abstract:Abstract Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g −1 ) at 100 mA · g −1 , with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g −1 on account of its high retained discharge specific capacity (251 mAh · g −1 for 0 wt% graphene, 385 mAh · g −1 for 1 wt% graphene, 741 mAh · g −1 for 3 wt% graphene, and 367 mAh · g −1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g −1 (45 mAh · g −1 for 0 wt% graphene, 256 mAh · g −1 for 1 wt% graphene, and 174 mAh · g −1 for 4 wt% graphene) from 100 mA · g −1 to 2000 mA · g −1 . The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.

Defect-enhanced performance of a 3D graphene anode in a lithium-ion battery

Defect-Introduced Graphene Sheets with Hole Structure As Lithium-Ion Battery Anode

A Defect‐Free Principle for Advanced Graphene Cathode of Aluminum‐Ion Battery

Three-Dimensional Graphene with Charge Transfer Doping for Stable Lithium Metal Anode

Defect-abundant Commercializable 3D Carbon Papers for Fabricating Composite Li Anode with High Loading and Long Life

In‐plane Defect Engineering Enabling Ultra‐stable Graphene Paper‐based Hosts for Lithium Metal Anodes

Ultrafast transformation of natural graphite into self-supporting graphene as superior anode materials for lithium-ion batteries

Defect mediated lithium adsorption on graphene-based silicon composite electrode for high capacity and high stability lithium-ion battery

Three-dimensional Hierarchical Graphene and CNT-coated Spinel ZnMn2O4 As a High-Stability Anode for Lithium-Ion Batteries

Can All Nitrogen-Doped Defects Improve the Performance of Graphene Anode Materials for Lithium-Ion Batteries?

High-Performance Silicon Battery Anodes Enabled by Engineering Graphene Assemblies

Three-dimensional Porous Graphene Microsphere for High-Performance Anode of Lithium Ion Batteries

Synthesis and electrochemical performance of hollow-structured NiO + Ni nanofibers wrapped by graphene as anodes for Li-ion batteries

Superior Rate Capability of Small Regenerated Graphite Particles Induced by Homogeneously Distributed Current Density Derived from Cracks and Intrinsic Defects

Coupling 3D Vertical Graphene Skeleton with Lithophilic ZnO Interface to Enable Highly Stable Lithium Metal Anode

Defect effects on the physical and electrochemical properties of nanoscale LiFe0.92PO4 and LiFe0.92PO4/C/graphene composites.

LiFePO4 Anchored on Pristine Graphene for Ultrafast Lithium Battery

Three-dimensional Cross-Linking Composite of Graphene, Carbon Nanotubes and Si Nanoparticles for Lithium Ion Battery Anode

Utilization of impurities and carbon defects in natural microcrystalline graphite to prepare silicon-graphite composite anode for high-performance lithium-ion batteries

Laponite-Assisted Graphite Anode with a 3D Conductive and Interlinked Structure for Lithium-Ion Batteries

Multilayer-graphene-stabilized Lithium Deposition for Anode-Free Lithium-Metal Batteries.