Abstract:Due to the growing electric vehicle market and new trends to reduce fuel consumption for a healthy environment, safe and reliable vehicles are desirable for reasons beyond EV and new technology. Although certain safety standards and legislation are in place and continuously improving but several concerns including battery safety, battery performance, vehicle structure, and battery design to be considered as these affect the overall reliability of Electric vehicles (EVs). Lithium-ion battery technology is considered a good solution to power electric vehicles but potential overheating due to stressful conditions such as mechanical abuse, overcharge, over-discharge, short circuit, and excessive heat from external environment gives rise to safety issues and the occurrence of one or more than one of these can lead to thermal runaway. In most cases, an electric short circuit is a necessary but not sufficient condition for the occurrence of thermal runaway after mechanical abuse. Chemistry of the cell, the resistance of separator to heat, size of the fractured part, and rate of heat transfer all play a role in processes leading to a thermal runaway, if the cell has not gone to thermal runaway right away it can still go into a slow process of electrochemical reaction, releasing gases that eventually could lead to a catastrophic event. This abstract investigates the mechanical behaviour of the separator in the LiCoO2/Graphite cylindrical 18650 cells. Internal short circuit (ISC) behaviour, strain rate dependency, and electrochemical status of the cells (i.e. SOC dependency) are studied to understand failure patterns. Furthermore, a simple and effective constitutive model for the separator layer is formed, facilitating further mechanical analysis and numerical simulation of lithium-ion battery study. The occurrence of ISC is investigated by jellyroll deformation where the casing is removed, and quasi-static load is applied. The numerical simulation model is developed to further investigate sequential structural failures and temperature changes. Simulation results showed good accuracy with experimental results and are useful to predict structural failure of cells. The number of failures including electrolyte leakage, change in shape, sudden voltage drop/temperature rise, and gas venting are observed.

Effect of notch depth of modified current collector on internal-short-circuit mitigation for lithium-ion battery

Mitigating internal short circuit in prismatic lithium‐ion battery pouch cell by using microstructured current collector

Effect of groove width of modified current collector on internal short circuit of abused lithium-ion battery

Analysis of Internal Short Circuit and Thermal Runaway of Li-Ion Battery Due to Mechanical Abuse

Heterogeneous current collector in lithium-ion battery for thermal-runaway mitigation

Thermal Runaway-Induced Current Interrupt Device and Vent Activation Behaviour in an 18650 Lithium-Ion Battery Cap Using the Johnson-Cook Criterion

Understanding of Stress‐Driven Internal Short Circuit Mechanisms in Lithium‐Ion Batteries with High SOCs

A Comprehensive Research on Internal Short Circuits Caused by Copper Particle Contaminants on Cathode in Lithium-Ion Batteries

Electrical and thermal interplay in lithium‐ion battery internal short circuit and safety protection

Multi-layer Internal Short-Circuit Mechanism and Thermal Runaway Risk Assessment of Lithium-Ion Batteries Using Nail Penetration Simulation

Internal Short Circuit Evaluation and Corresponding Failure Mode Analysis for Lithium-Ion Batteries

A Study on the Behaviors of Internal Short Circuit in Lithium-Ion Batteries

A novel anisotropic model for multi-stage failure threshold of Lithium-ion battery subjected to impact loading

Internal Short Circuit of Lithium Metal Batteries under Mechanical Abuse

A review of the internal short circuit mechanism in lithium‐ion batteries: Inducement, detection and prevention

Comprehensive Battery Safety Risk Evaluation: Aged Cells versus Fresh Cells Upon Mechanical Abusive Loadings

Mechanism, modeling, detection, and prevention of the internal short circuit in lithium-ion batteries: Recent advances and perspectives

Unveiling micro internal short circuit mechanism in a 60 Ah high-energy-density Li-ion pouch cell

Early Braking of Overwarmed Lithium-Ion Batteries by Shape-Memorized Current Collectors.

Low-Temperature Aging Effect on Safety of Lithium-Ion Batteries Subjected to Intrusion: A Comparative Study of 18650 and Pouch Cells

Revealing the internal short circuit mechanisms in lithium-ion batteries upon dynamic loading based on multiphysics simulation