Abstract:<p>Rapid solidification cellular structures are known to play a crucial role in helping achieve high strength and high ductility in 316L austenitic stainless steels fabricated by laser powder-bed-fusion (L-PBF). Despite this, the understanding of their intrinsic characteristics (e.g., crystallographic orientations, dislocations, precipitates, elemental segregations) and the respective impacts on the material's strength and thermal stability remains nebulous. We conduct several dedicated transmission electron microscopy (TEM) studies to investigate these strengthening mechanisms and identified that cell walls follow specific crystallographic orientations. The high density of tangled dislocations inside cell walls are found to have a higher tendency to dissociate, forming wider stacking faults while oxide precipitates are confined inside cell walls. These features act as barriers to moving dislocations upon plastic deformation and contribute to the high strength. Our dislocation dynamic simulations indicate that segregated particles are effective in blocking dislocations locally, helping the formation of dislocation cells and participating to the material strengthening. To study the thermal stability of L-PBF 316L SS, we perform systematic post-processing heat treatments from 400-1200°C. Microstructure characterizations using electron backscatter diffraction, TEM, and synchrotron X-ray diffraction coupled with dislocation dynamics and CALPHAD simulations and tensile testing reveal three heat treatment zones where the structure-property relationship can be tuned. After annealing up to 600°C, the microstructure remains stable; but the work hardening behavior is altered with a material that retains high strength and high ductility. Annealing between 600-1000°C activates elemental diffusion and gradual disappearance of cell walls, leading to a sharp drop in yield strength and a tradeoff between strength and ductility. Low-angle grain boundaries remain stable up to 1000°C while the average grain size defined by high angle grain boundaries is near constant at annealing temperatures up to 800°C. Annealing above 1100°C removes all L-PBF microstructure footprints and renders a conventional-like microstructure. Compared to conventional materials, L-PBF 316LSS displays substantially higher thermal stability and superior performance at elevated temperatures.</p>

Long-Term Effects of Temperature Exposure on SLM 304L Stainless Steel

Deformation Mechanisms of Selective Laser Melted 316l Austenitic Stainless Steel in High Temperature Low Cycle Fatigue

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Effect of Heat Treatment on Microstructural Evolution in Additively Manufactured 316L Stainless Steel

Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel

Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing

Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel after Heat Treatment

Thermal stability and microstructural evolution of additively manufactured 316L stainless steel by laser powder bed fusion at 500–800 °C

Effect of Heat Treatment on Microstructures and Mechanical Properties of SS316L by Micro Selective Laser Melting

Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance

Structural and micromechanical properties of 316L stainless steel produced by selective laser melting

Effect of annealing and strain rate on the microstructure and mechanical properties of austenitic stainless steel 316L manufactured by selective laser melting

Investigation of the Properties of 316L Stainless Steel after AM and Heat Treatment

Analysis of Fatigue Properties of Selective Laser Melting 316L Stainless Workpiece After Post-heat Treatment

New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion

Effect of 316L Stainless Steel Fabrication on Oxidation Resistance, Surface Morphology, and Hot Tensile Behavior

High-temperature dry sliding wear behavior of additively manufactured austenitic stainless steel (316L)

The Evolution of Oxygen-Rich Nanoparticle and Its Effect on the Mechanical Property in Selective Laser Melted 304L Stainless Steel

Regulation of Microstructure, Residual Stress, and Mechanical Properties by Pre-straining and Subsequent Heat Treatment in Selective Laser Melted 304L Stainless Steel

Mechanical Properties of Austenitic Stainless Steel After Exposure to Elevated Temperature

Effect of Thermal Treatment on Corrosion Behavior of AISI 316L Stainless Steel Manufactured by Laser Powder Bed Fusion