Abstract:In recent years, the types and quantities of polyurethane products have increased day by day. However, traditional petroleum-based water-based polyurethanes not only have the problem of difficult waste disposal, but also accelerate the depletion of petroleum materials. Herein, an eco-friendly polymer was successfully prepared by introducing tannic acid (TA) into castor oil-based waterborne polyurethane (WPU). The effects of the incorporation of TA, a bio-based material, on the particle size of the resulting polyurethane (PU) dispersion, and the thermal performance, mechanical properties, and hydrophobicity of PU membranes were systematically investigated. Finally, ATR-FTIR and SEM of cured films after degradation were measured to characterize the degradation ability of the membranes. It was found that the tensile strength of the samples is improved from 12.67 to 19.57 MPa with the TA content increasing from 0 to 1.5%, nevertheless their elongation at break declines from 306.51 to 237.12%. A noteworthy increase in the glass transition temperature (Tg) was exhibited by using DSC and DMA for the resulting PU films with increasing the TA content. Besides, the improvement in the water absorption of the blend films decreases from 14.5 to 10.2% according to the advantage of TA increasing the degree of cross-linking of the system. After 120 days of degradation, it can be seen that the urethane bond and the aliphatic ester bond played a vital role in the degradation process through the infrared of the degraded films. At the same time, the introduction of TA improves the degradation performance of WPU films. What is more, the application of WPU dispersions containing tannins on the leather surface shows excellent comprehensive performance, which means that WPU dispersions have potential applications as leather finishing agents. This work takes advantage of two kinds of bio-based materials, the mass of bio-based materials accounts for 57% of the total mass, which not only shortens the utilization of petroleum resources, but also effectively resolved the problem that poor quality of castor oil-based WPU and traditional waste is difficult to degrade, improving the commercial value of castor oil-based PU.

A Review on Waterborne Thermosetting Polyurethane Coatings Based on Castor Oil: Synthesis, Characterization, and Application

Waterborne Coatings Based on Renewable Oil Resources: an Overview

Study on Castor Oil-based Cationic Waterborne Polyurethane and Its Application

Preparation and Properties of Polyurethanes Based on Castor Oil Chemically Modified with Yucca Starch Glycoside

Development of Green Waterborne UV-Curable Castor Oil-Based Urethane Acrylate Coatings: Preparation and Property Analysis

Polyhydroxyurethanes (PHUs) Derived from Diphenolic Acid and Carbon Dioxide and Their Application in Solvent- and Water-Borne PHU Coatings

Preparation castor oil-modified high bio-based waterborne polyurethane and its application

Synthesis and properties of castor oil–based cationic waterborne polyurethane modified by epoxy resin

Progress of bio-based coatings in waterborne system: Synthesis routes and monomers from renewable resources

Advances in Waterborne Polyurethane and Polyurethane-Urea Dispersions and Their Eco-friendly Derivatives: A Review

Waterborne polyurethane polymer dispersions using Castor oil and curcumin as bioresources: Synthesis, characterization, and antibacterial textile applications

A Novel Polyfunctional Polyurethane Acrylate Derived from Castor Oil-Based Polyols for Waterborne UV-Curable Coating Application

High-performance castor oil-based polyurethane thermosets: Facile synthesis and properties

Bio-based polyurethane coating synthesized from modified castor oil - applicable in base coat of automobile paint

Preparation and properties of organosilicon and castor-oil-modified rosin-based waterborne polyurethane coatings

Anticorrosive waterborne polyurethane coatings derived from castor oil and renewable diols

Renewable Polyurethanes from Sustainable Biological Precursors

Waterborne polyurethane and its nanocomposites: a mini-review for anti-corrosion coating, flame retardancy, and biomedical applications

The extraction of polyol for the synthesis of lignin-based polyurethane coatings – a review

Utilization of oleic acid in synthesis of epoxidized soybean oil based green polyurethane coating and its comparative study with petrochemical based polyurethane

Preparation of degradable castor oil-based waterborne polyurethane with tannic acid as crosslinking agent and its application on leather surface coating