Abstract:In recent years, the types and quantities of polyurethane products have increased day by day. However, traditional petroleum-based water-based polyurethanes not only have the problem of difficult waste disposal, but also accelerate the depletion of petroleum materials. Herein, an eco-friendly polymer was successfully prepared by introducing tannic acid (TA) into castor oil-based waterborne polyurethane (WPU). The effects of the incorporation of TA, a bio-based material, on the particle size of the resulting polyurethane (PU) dispersion, and the thermal performance, mechanical properties, and hydrophobicity of PU membranes were systematically investigated. Finally, ATR-FTIR and SEM of cured films after degradation were measured to characterize the degradation ability of the membranes. It was found that the tensile strength of the samples is improved from 12.67 to 19.57 MPa with the TA content increasing from 0 to 1.5%, nevertheless their elongation at break declines from 306.51 to 237.12%. A noteworthy increase in the glass transition temperature (Tg) was exhibited by using DSC and DMA for the resulting PU films with increasing the TA content. Besides, the improvement in the water absorption of the blend films decreases from 14.5 to 10.2% according to the advantage of TA increasing the degree of cross-linking of the system. After 120 days of degradation, it can be seen that the urethane bond and the aliphatic ester bond played a vital role in the degradation process through the infrared of the degraded films. At the same time, the introduction of TA improves the degradation performance of WPU films. What is more, the application of WPU dispersions containing tannins on the leather surface shows excellent comprehensive performance, which means that WPU dispersions have potential applications as leather finishing agents. This work takes advantage of two kinds of bio-based materials, the mass of bio-based materials accounts for 57% of the total mass, which not only shortens the utilization of petroleum resources, but also effectively resolved the problem that poor quality of castor oil-based WPU and traditional waste is difficult to degrade, improving the commercial value of castor oil-based PU.

Waterborne polyurethane polymer dispersions using Castor oil and curcumin as bioresources: Synthesis, characterization, and antibacterial textile applications

Multifunctional Bio-Based Waterborne Polyurethane with Excellent Transparency, Strength, Abrasion Resistance, and Antimicrobial Properties

Development of Sustainable Citric Acid-Based Polyol To Synthesize Waterborne Polyurethane for Antibacterial and Breathable Waterproof Coating of Cotton Fabric

Synthesis of Cationic Waterborne Polyurethanes from Waste Frying Oil as Antibacterial Film Coatings

Synthesis and application of multifunctional lignin-modified cationic waterborne polyurethane in textiles

Preparation castor oil-modified high bio-based waterborne polyurethane and its application

Novel multifunctional highly crosslinked bio-based waterborne polyurethane networks modified via long fatty hydrophobic side chains

Study on Castor Oil-based Cationic Waterborne Polyurethane and Its Application

Development of Bio and Non-Fluorinated Palmitic Acid Based Water Repellent for Cotton Fabric

Synthesis and properties of castor oil–based cationic waterborne polyurethane modified by epoxy resin

A Review on Waterborne Thermosetting Polyurethane Coatings Based on Castor Oil: Synthesis, Characterization, and Application

Anticorrosive waterborne polyurethane coatings derived from castor oil and renewable diols

Enhanced Mechanical Properties and Functional Performances of Cationic Waterborne Polyurethanes Enabled by Different Natural Phenolic Acids

Waterborne polyurethane and its nanocomposites: a mini-review for anti-corrosion coating, flame retardancy, and biomedical applications

Development of Green Waterborne UV-Curable Castor Oil-Based Urethane Acrylate Coatings: Preparation and Property Analysis

Biobased polyurethane coatings with fast self-healing and tunable mechanical properties derived from curcumin and castor oil

Realization of customizable performance castor oil-based waterborne polyurethane antiseptic coatings via arbutin

Synthesis and application of comb-like waterborne polyurethane as a dispersant for disperse dyes

Preparation and Characterization of Modified Castor Oil Via Photo‐click Chemistry Foruv‐curable Waterborne Polyurethane with Enhanced Water Resistance and Low Conductive Percolation Threshold

Preparation of degradable castor oil-based waterborne polyurethane with tannic acid as crosslinking agent and its application on leather surface coating

Multifunctional waterproof breathable coating on polyester-based woven protective clothing for healthcare application