A Novel Polyfunctional Polyurethane Acrylate Derived from Castor Oil-Based Polyols for Waterborne UV-Curable Coating Application

Youmin Tuo,Xubiao Luo,Yahong Xiong,Chang-An Xu,Teng Yuan

DOI: https://doi.org/10.3390/polym16070949

IF: 5

2024-03-31

Polymers

Abstract:Because of its unique molecular structure and renewable properties, vegetable oil has gradually become the focus of researchers. In this work, castor oil was first transformed into a castor oil-based triacrylate structure (MACOG) using two steps of chemical modification, then it was prepared into castor oil-based waterborne polyurethane acrylate emulsion, and finally, a series of coating materials were prepared under UV curing. The results showed that with the increase in MACOG content, the glass transition temperature of the sample was increased from 20.3 °С to 46.6 °С, and the water contact angle of its surface was increased from 73.85 °С to 90.57 °С. In addition, the thermal decomposition temperature, mechanical strength, and water resistance of the samples were also greatly improved. This study not only provides a new idea for the preparation of waterborne polyurethane coatings with excellent comprehensive properties but also expands the application of biomass material castor oil in the field of coating.

polymer science

What problem does this paper attempt to address?

The paper aims to address the following issues:

1. **Environmental issues of traditional polyurethane acrylate (PUA) coatings**: Traditional polyurethane acrylate coatings usually require the addition of reactive diluents to adjust their high viscosity. These reactive diluents are typically low-boiling, volatile, and toxic acrylates, which pose hazards to the environment and human health. With the increasing awareness of environmental protection and the implementation of related policies, there is growing attention to pollution-free and environmentally friendly water-based coatings.

2. **Improving coating performance**: Although traditional polyurethane acrylate coatings have excellent adhesion, flexibility, abrasion resistance, and weather resistance, their overall performance still needs improvement. Particularly in terms of thermal stability, mechanical strength, and water resistance, further enhancements are required.

3. **Using renewable resources to replace petrochemical raw materials**: As petroleum resources gradually deplete, attention has shifted to abundant, low-cost, and renewable biomass materials. Among them, vegetable oil has gained widespread attention due to its unique molecular structure, abundant availability, suitable price, and biodegradability. Through chemical modification, vegetable oil can be used to prepare various functionalized derivatives for synthesizing high-performance coating materials.

Specifically, this study chemically modified castor oil into multi-functional castor oil triacrylate (MACOG) and introduced it into waterborne polyurethane acrylate emulsions to prepare a series of UV-curable coating materials. The research results show that with the increase in MACOG content, the glass transition temperature, surface water contact angle, thermal decomposition temperature, mechanical strength, and water resistance of the coatings were significantly improved. This not only provides a new approach for preparing high-performance waterborne polyurethane coatings but also enhances the added value of castor oil, offering a new research direction for using vegetable oil to replace petrochemical resources in the preparation of coating products.