Abstract:Polymer composites with highly thermally conductive and electrical insulation are urgently demanded for thermal management in modern electrical and energy applications. However, the incorporation of metal fillers in traditional polymeric composites usually fails to meet the requirements for simultaneously high thermal conductivity and high electrical insulation. Here, we successfully fabricated composites with high thermal conductivity and high electrical insulation by in situ thermal expansion of expandable graphite (EG) and in situ oxidation of aluminum (Al) nanoflakes in aluminum-plastic package waste (APPW). Due to the synergistic effect of the hybrid filler framework, the maximum thermal conductivity reached as high as 8.7 W m–1 K–1 for APPW/EG10/Al60-F composites. In addition, the formation of the nano Al2O3 layer around the Al filler surface brings extremely low electrical conductivity (<10–14 S cm–1) and low dielectric loss (<0.06). Based on the results of finite element simulation, the heat flowed mainly along the effective filler framework and the high thermal conductivity is attributed to the interconnection of the high aspect ratio filler. Furthermore, the strong thermal management capability of the prepared composites was demonstrated in the heat dissipation experiment. The present work suggests that surface-oxidized Al nanoflakes demonstrate fascinating performance and show promising application as thermal management materials in emerging electrical systems and electronic devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c18603?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c18603</a>.SEM images of expandable graphite (Figure S1); FTIR absorbance data of carbon dioxide in APPW/EG/Al-F composites (Figure S2); XRD pattern of the APPW/EG composite prepared by melt blend under 200 °C (Figure S3); TGA and DTG curves of APPW/EG/Al composites (Figure S4); SEM images of the fracture surface of composites (Figure S5); TEM images of graphite nanosheets in APPW/EG10/Al30-F composites (Figure S6); TEM images of as-received Al platelet (Figure S7); volume resistivity of APPW/EG composites (Figure S8); APPW/EG10/Al60-S at different cooling times at insulating foam within 1 min (Figure S9); dielectric permittivity and dielectric loss of composites at 1k Hz (Figure S10); dielectric permittivity, dielectric loss, and electric conductivity of composites at different temperatures at 1k Hz (Figure S11); list of samples and their codes for different EG and Al loadings (Table S1); calculated electrical conductivity, electronic thermal conductivity, and phonon thermal conductivity of composites (Table S2); major parameters used in the simulation (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c18603/suppl_file/am0c18603_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Controlled High Filler Loading of Functionalized Al2O3-Filled Epoxy Composites for LED Thermal Management

Heat transfer in high-power LED with thermally conductive particle-filled epoxy composite as thermal interface material for system-level analysis

Double core shell structured Al@Al<sub>2</sub>O<sub>3</sub>@SiO<sub>2</sub> filled epoxy composites for thermal management application

Effect of the alumina micro-particle sizes on the thermal conductivity and dynamic mechanical property of epoxy resin

Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances

High-performance Light-Emitting Diodes Encapsulated with Silica-Filled Epoxy Materials.

Core-shell Cu@Al2O3 fillers for enhancing thermal conductivity and retaining electrical insulation of epoxy composites

Enhanced Thermal Conductivity of Epoxy Composites Filled with Al2O3/Boron Nitride Hybrids for Underfill Encapsulation Materials

Strawberry Like Micro@nano Hybrid Filler for Thermally Conductive Epoxy Composites

Effect of segment structure of monotrimethoxysilylethyl-terminated asymmetric Polysiloxanes on the thermal management performance of AlN-filled silicone pastes

Behavior of a graphene/epoxy composite used as thermal interface material for LED heat dissipation

Enhanced thermal conductivity of epoxy composites via bridged Al 2 O 3 network with in situ formed silver nanoparticles

The Use of Polyimide-Modified Aluminum Nitride Fillers in AlN@PI/Epoxy Composites with Enhanced Thermal Conductivity for Electronic Encapsulation

Fabrication of silicone-based gap filler for electric vehicles using magnesium oxide thermally conductive fillers

Highly Thermally Conductive and Superior Electrical Insulation Polymer Composites via In Situ Thermal Expansion of Expanded Graphite and In Situ Oxidation of Aluminum Nanoflakes

High Voltage Special Issue: Thermally Conductive but Electrically Insulating Materials For High Voltage Applications

Reduced interfacial thermal resistance in acidic alumina-filled adhesives for heat dissipative applications

A Comparative Thermal and Lumen Performance Study of Thin-film Amorphous Silicon Dielectric Coating on Aluminum as an LED Packaging Substrate

Thermal improvement of die attach by using PDMS-grafted particles as filler and Its application in solid state lighting

Role of Interface on the Thermal Conductivity of Highly Filled Dielectric Epoxy/AlN Composites

Hybrid Alumina–Silica Filler for Thermally Conductive Epoxidized Natural Rubber