Abstract:It has been recently demonstrated that non-thermal plasmas (NTP) can function as nanoparticle processing reactors by selectively heating particles, inducing chemical reactions and structural transformations. However, lacking in prior studies is direct comparison between NTP particle -processing and more traditional, equilibrium thermal processing. With tandem differential mobility analysis, we studied the sintering of metallic nano-aggregates as they traversed through an atmospheric pressure NTP. As a reference, sintering experiments with a tube furnace were also conducted. Silver and bismuth nano-aggregates were synthesized via gas phase reactors for ex-periments and were selected to represent high and low melting point metals, respectively. We found that the silver aggregate sintering behavior was similar in the plasma and the furnace systems. With increasing plasma power/furnace temperature, the sintering process can be divided into to an aggregate compaction stage, a constant mobility stage and a vaporization stage. The mobility size shift of the silver aggregates was used to estimate their equivalent temperatures in the plasma. With an aggregate sintering model, an equivalent particle sintering temperature was estimated to be 165-270 degrees C in the plasma as the silver aggregate mobility diameter decreased from 100 nm to 95-65 nm. In contrast to silver, due to the early onset of particle vaporization, the three stages of bismuth aggregate sintering were not as clearly discernible. The constant mobility stage was only observed in a narrow range of plasma powers for the 100 nm aggregates and was not evident for the 20 nm aggregates. Additionally, distinct patterns of bismuth particle mobility shifts were observed during plasma sintering and furnace sintering, with the plasma reactor being a more effective sintering unit. The reducing environment within the plasma and the partial oxidation of the bismuth aggregates could be the reason for the effectiveness of plasma sintering. Further measurements of the particle transmission efficiency through the plasma reactor shows that it is particle size and material dependent.

Thermal Plasma Spheroidization of High-Nitrogen Stainless Steel Powder Alloys Synthesized by Mechanical Alloying

Fabrication of Spherical Steel Powder with Superequilibrium Nitrogen Content for Laser Powder Bed Fusion Additive Manufacturing

Effect of Electromagnetic Stirring on Fine Grain Formation and Tensile Property Improvement for Fe-Ni Superalloy

MECHANICAL ALLOYING WITH PARTIAL AMORPHIZATION OF FE–CR–CO–NI–MN MULTICOMPONENT POWDER MIXTURE AND ITS SPARK PLASMA SINTERING FOR COMPACT HIGH-ENTROPY MATERIAL PRODUCTION

Mechanical Alloying with the Partial Amorphization of the Fe–Cr–Co–Ni–Mn Multicomponent Powder Mixture and Its Spark Plasma Sintering to Produce a Compact High-Entropy Material

Production of Spheroidized Micropowders of W-Ni-Fe Pseudo-Alloy Using Plasma Technology

Study on the RF Inductively Coupled Plasma Spheroidization of Refractory W and W-Ta Alloy Powders

Segregation of chemical elements in the volume of powder particles during it's treatment as a method for the production of structurally graded powder materials

Features of Melt Gas Atomization and Selective Laser Melting of High-Strength Austenitic Nitrogen-Containing Steel Powders

Sintering of Metallic Nano-Aggregates in an Atmospheric Pressure Non-Thermal Plasma

Effect of Mechanical Alloying on the Microstructure of CoCrNiTiMox High Entropy Alloy

Spark Plasma Sintering of Gas Atomized AlNiYLaCo Amorphous Powders

Mechanical alloying and direct powder forging of Ni–20Cr–20Fe-0.08C alloy

Controlling plasma-based surface modifications of an austenitic alloy by thermochemical and athermal diffusions

Spheroidization of Silica Powders by Radio Frequency Inductively Coupled Plasma with Ar–H 2 and Ar–N 2 As the Sheath Gases at Atmospheric Pressure

Nanostructured Eutectoid Steel Synthesized by Mechanical Alloying and Spark Plasma Sintering

Properties of Powders Produced by Plasma-Arc Spheroidization of Current-Carrying Fe–Al Flux-Cored Wire

Cu-Al-Ni Nanocrystalline Compacts Obtained by Spark Plasma Sintering of Mechanically Alloyed Powders

Mechanical Alloying and Spark Plasma Sintering of Ni-Al-Ti-B Powders for Fabricating Nanocrystailine (Tib+tib2)/ni-3(Al, Ti) Composite

Synthesis of Ultrafine Fe-W-Al-Ti-Ni-C-B Powders by Mechanical Alloying

Nitrogen Interstitial Alloying of CoCrFeMnNi High Entropy Alloy through Reactive Powder Milling