Abstract:Interstitial alloying has been proved to be a promising option to improve the mechanical properties in various commercial alloys. Herein, we systematically investigate the microstructure evolution and mechanical property change of CoCrFeMnNi high-entropy alloys (HEAs) with varied nitrogen contents as an interstitial alloying element. To equilibrate the thermal history, all the alloys are heat-treated as follows: homogenization (1100 ℃ for 20 h), cold-rolling (reduction ratio of 60%), and subsequent annealing (900 ℃ for 3 min). In N1 alloy (CoCrFeMnNi HEA with 1 at% of nitrogen doping), we could observe fully recrystallized grains with a small amount of Cr2N precipitates. As the nitrogen contents increased to 3 at% (N3 alloy), the recrystallization was significantly retarded by the formation of 3 different types of Cr2N precipitates, leading to having ~60% of non-recrystallized grains. Furthermore, the various precipitates let the alloy have a heterogeneous complex microstructure. With increasing nitrogen contents, the yield strength and ultimate tensile strength can be improved without significant reduction of ductility, which exceeds those of Cantor HEA by nearly a factor of two. The effect of each strengthening mechanism on the improved strength in heterogeneous complex microstructure is systematically discussed. These results are expected to provide a novel guideline on how to effectively control key properties of HEAs by interstitial alloying through tailoring of heterogeneous microstructure as well as the inherent complexity of HEAs.

Nitrogen Interstitial Alloying of CoCrFeMnNi High Entropy Alloy through Reactive Powder Milling

Effect of nitrogen on microstructure and mechanical properties of CrMnFeVTi6 high entropy alloy

Strengthening by customizing microstructural complexity in nitrogen interstitial CoCrFeMnNi high-entropy alloys

CrMnFeCoNi high entropy alloys with carbon and nitrogen: mechanical properties, wear and corrosion resistance

In situ synthesis of N-containing CoCrFeNi high entropy alloys with enhanced properties fabricated by selective laser melting

Mechanical properties of nanostructured CoCrFeNiMn high-entropy alloy (HEA) coating

Nb Micro-Alloying on Enhancing Yield Strength and Hindering Intermediate Temperature Decomposition of a Carbon-Doped High-Entropy Alloy

Alloying Behavior and Novel Properties of CoCrFeNiMn High-Entropy Alloy Fabricated by Mechanical Alloying and Spark Plasma Sintering

Microstructure and Properties of CrMnFeCoNi High-Entropy Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering

Microstructural Study of CrNiCoFeMn High Entropy Alloy Obtained by Selective Laser Melting

Alloying Behavior, Microstructure and Mechanical Properties in a FeNiCrCo0.3Al0.7 High Entropy Alloy

Stabilization of mechanical strength in a nanocrystalline CoCrNi concentrated alloy by nitrogen alloying

Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy

Cold Spray and Laser-Assisted Cold Spray of CrMnCoFeNi High Entropy Alloy Using Nitrogen as the Propelling Gas

Microstructure and mechanical properties of mechanically-alloyed CoCrFeNi high-entropy alloys using low ball-to-powder ratio

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Nanostructured Al–Ti–Fe–Mn–Ni High-Entropy Alloy by Mechanical Alloying: Synthesis and Characterization

Synthesis and Phase Evolution of a Nanocrystalline FexCrNiAl (x = 1.0, 0.5, 0.25) High-Entropy Alloys by Mechanical Alloying

In-situ Synthesis of Dual-Phase Nitrides and Multiple Strengthening Mechanisms in FeCoCrNiAl0.5 High Entropy Matrix Composite Coatings by Laser Cladding and Plasma Nitriding

In Situ Development and High Temperature Features of CoCrFeNi-M6Cp High Entropy-Alloy Based Hardmetal

Effect of Interstitial Elements on the Cryogenic Mechanical Behavior of FCC High Entropy Alloys