(Battery Student Slam 8 Award Winner) Evaluating Electrodeposited Tin and Antimony-Based Anodes for Sodium-Ion Batteries
Jessica Ruby Gallawa,Jeffrey Ma,Amy L Prieto
DOI: https://doi.org/10.1149/ma2024-015716mtgabs
2024-08-21
ECS Meeting Abstracts
Abstract:The widescale adaption of intermittent renewable energy sources, such as wind and solar, must be accompanied by a grid storage network to store energy when it is abundant and redistribute it as needed for on-demand use. Short-term storage in the form of rechargeable batteries is an attractive avenue for meeting these storage needs. The dominant technology in today's market, the lithium-ion battery (LIB), is cost-prohibitive due to the need for rare-earth materials. Using the same working principle as LIBs, sodium-ion batteries (NIBs) utilize earth-abundant, low-cost sodium compounds instead of lithium compounds. Tin (Sn) and antimony (Sb) alone are promising anode materials for sodium-ion batteries with high theoretical capacities (847 and 660 mAh/g for Sn and Sb with Na, respectively) relative to current LIB anode chemistry (372 mAh/g) [1,2]. When combined, SnSb has shown to have increased stability relative to Sn or Sb alone [3]. Here, we synthesized Sn-Sb thin films with varied Sn and Sb atomic ratios by co-electrodeposition from a deep eutectic solvent by modifying solution stoichiometry and electrodeposition parameters. Using a combination of X-ray photoelectron spectroscopy (XPS), X-ray diffraction, and energy dispersive X-ray spectroscopy (EDS), phases and compositions of Sn-Sb synthesized by electrodeposition were identified. Once synthesized, we sought to determine the influence of morphology, surface chemistry, and composition on the capacity retention and rate capabilities of Sn and Sb-based anodes in NIBs. An optimized electrode composition was identified using a carbonate-based electrolyte, which resulted in stable capacity retention cycling at a rate of C/2 for 270 cycles. [1] W. T. Jing, C. C. Yang, and Q. Jiang, Journal of Materials Chemistry A, 8, 2913–2933 (2020). [2] S. Megahed and B. Scrosati, Journal of Power Sources, 51, 79–104 (1994). [3] W. P. Kalisvaart, H. Xie, B. C. Olsen, E. J. Luber, and J. M. Buriak, ACS Applied Energy Materials, 2, 5133–5139 (2019).
English Else