Abstract:Sodium-ion battery is evolving into a desirable alternative technology to lithium-ion batteries, thanks to its wide material distribution and low cost. Tin-antimony oxide is gaining research interest as a sodium-ion battery anode material owing to its ideal theoretical specific capacity, environment friendly, and low cost. However, because of the inner nature of poor electrical conductivity of oxides and slow ionic diffusion kinetic, the electrochemical performance of tin-antimony oxides (SSO) differs significantly from the theoretical value of merit. In this paper, we demonstrated N-doping porous carbon fibers encapsulated Sn/Sb@Sb 2 SnO 5 composite (Sn/Sb@Sb 2 SnO 5 @PCFs-N) material. Through the use of a simple electrostatic spinning technique, the Sn and Sb nanocrystalline were in situ generated around the SSOs in a specific way, and the N-doping in the fabricated porous carbon fibers can modulate the charge transport in the fabricated composite. The unique structure can successfully increase the electrical conductivity and the specific capacity of the fabricated composite. Using as anode for Na + ions storage, the fabricated composite delivers high specific capacity and good cycling stability and rate capability, showing a high capacity of 450 mAhg −1 at 50 mAg −1 current density even after 100 cycles. The better rate capability can be sustained even when the current raised up to 500 mA g −1 . This current work can offer a perspective on the effect of phases modified and doping on the functionality of materials for the next-generation high-specific energy sodium-ion battery.

Performance of SnSb:Ce, Co alloy as anode for lithium-ion batteries

Sn1.5Sb3Ce0.5 as effective anode material for Li ion batteries: Electrochemical and electrical analyses

Synthesis and electrochemical characterizations of Ce doped SnS2 anode materials for rechargeable lithium ion batteries

Comparison between SnSb–C and Sn–C composites as anode materials for lithium-ion batteries

SnSb Alloy Nanoparticles Embedded in N-doped Porous Carbon Nanofibers As a High-Capacity Anode Material for Lithium-Ion Batteries

The improved electrochemical performance of SnSb-based alloy anode materials for Li-ion batteries

N-doped Sb2SnO5@C as advanced anode material for sodium-ion batteries

Graphene-supported Ce - SnS 2 nanocomposite as anode material for lithium-ion batteries

Advanced Electrochemical Properties of Ce-modified Li 2 ZnTi 3 O 8 Anode Material for Lithium-Ion Batteries

Nanostructural CoSnC Anode Prepared by CoSnO3 with Improved Cyclability for High-Performance Li-ion Batteries

Preparation and Electrochemical Properties of Nano-sized Co-Sn Alloy Anode for Lithium Ion Batteries

C@CoSn 2 composite prepared through one-step electro-deoxidation method as anode material of lithium-ion batteries with long-cycle-life and high capacity

Co-Sn nanocrystalline solid solutions as anode materials in lithium-ion batteries with high pseudocapacitive contribution.

Effect of alloying on the electrochemical performance of Sb and Sn deposits as an anode material for lithium-ion and sodium-ion batteries

A High-Performance Ce and Sn Co-Doped Cathode Material with Enhanced Cycle Performance and Suppressed Voltage Decay for Lithium Ion Batteries

SnS particles anchored on Ti3C2 nanosheets as high-performance anodes for lithium-ion batteries

SnS particles anchored on Ti<sub>3</sub>C<sub>2</sub> nanosheets as high-performance anodes for lithium-ion batteries

Revealing the unique process of alloying reaction in Ni-Co-Sb/C nanosphere anode for high-performance lithium storage

Enhanced Electrochemical Performance of a Tin−antimony Alloy/N‐Doped Carbon Nanocomposite as a Sodium‐Ion Battery Anode

Facile synthesis of high N-content carbon-confined amorphous SnS as anode material for lithium-ion batteries

Sn3O4 Nanosheets with N-doped Carbon Coating for High Performance Lithium Storage