Abstract:Acetone in human exhaled breath can be used as a biomarker for the early diagnosis of diabetes, because exhaled gas contains a large amount of water and other volatile organic compounds (VOCs), improving the selectivity is still a great challenge. In this work, 1D Co3O4 derived from MOF-74 with high moisture resistance and low detection limit was synthesized and used for the detection of acetone markers in human exhaled gas. The 1D porous Co3O4 with different average grain sizes were obtained by precise control of the MOF-74 pyrolysis temperature in a range of 300–450 ℃. The static gas sensitivity test results indicate that the MOF-74-derived Co3O4 at a pyrolysis temperature of 300 ℃ showed the highest response to 50 ppm acetone at an optimal operating temperature of 175 ℃. In the presence of four interfering gases including ethanol, methanol, formaldehyde and ammonia, the prepared Co3O4 sensor showed good selectivity to acetone. In addition, the exhalation simulation tests show that the detection limit of Co3O4 sensor for acetone in exhaled gas is as low as 500 ppb. Moreover, as the relative humidity increases, the initial resistance of the Co3O4 sensor increases, but the response value to 1.8 ppm acetone at 175 ℃ is almost unchanged. The good acetone sensing properties in exhaled gas were attributed to the unique structure of MOF-74 after pyrolysis, which prevented the nanoparticle agglomeration from occurring and provided more exposed active sites. Furthermore, the effective catalytic activity of surface Co2+ in the Co3O4 tetrahedral ligand of the cubic spinel structure enhances the sensing performance of acetone. With the advantages of low detection limit and high anti-humidity, gas sensors based on Co3O4 derived from MOF-74 are expected to become a potential candidate for the detection of acetone in exhaled gas of patients with diabetes in clinical non-invasive testing.

A highly sensitive and moisture-resistant gas sensor for diabetes diagnosis with Pt@In2O3 nanowires and a molecular sieve for protection

Ultrasensitive Acetone Gas Sensor Based on a K/Sn-Co 3 O 4 Porous Microsphere for Noninvasive Diabetes Diagnosis

Pt-decorated foam-like Ga-In bimetal oxide nanofibers for trace acetone detection in exhaled breath

Construction of Mesoporous Silica-Implanted Tungsten Oxides for Selective Acetone Gas Sensing

Efficient mixed-potential acetone sensor with yttria-stabilized zirconia and porous Co3O4 nanofoam sensing electrode for hazardous gas monitoring and breath analysis

Bimetallic PtAu-Decorated SnO2 Nanospheres Exhibiting Enhanced Gas Sensitivity for Ppb-Level Acetone Detection

Graphene quantum dot-functionalized three-dimensional ordered mesoporous ZnO for acetone detection toward diagnosis of diabetes

Black phosphorus nanosheets-sensitized Zn-doped α-Fe2O3 nanoclusters for trace acetone detection

Nanowire Array Breath Acetone Sensor for Diabetes Monitoring

Acetone Sensors for Non-Invasive Diagnosis of Diabetes Based on Metal-Oxide-semiconductor Materials

Enhanced Acetone-Sensing Properties of Pt-Decorated In 2 O 3 Hollow Microspheres Derived from Pt-Embedded Template

High anti-humidity exhaled acetone sensor based on Co3O4 derived from MOF-74

Boosting Acetone Response of P-Type Co3O4 Sensor Via Sn and Ni Co-Doping for Diabetes Diagnosis

Detection of Acetone as a Gas Biomarker for Diabetes Based on Gas Sensor Technology

Enhanced Acetone-Sensing Properties of Pt-Decorated In2O3 Hollow Microspheres Derived from Pt-Embedded Template.

Nitrogen-Doped Carbon Quantum Dots Activated Dandelion-Like Hierarchical WO3 for Highly Sensitive and Selective MEMS Sensors in Diabetes Detection

Enhanced Acetone Detection for Non-Invasive Diabetes Monitoring by Atomic layer deposited WO3 nanoparticle on Hierarchical In2O3 Particles

Ultra-small TiO2 nanocubes with highly active (0 0 1) facet for acetone fast detection and diagnosis of diabetes

Oxygen Vacancy-Rich Bimetallic Au@Pt Core-Shell Nanosphere-Functionalized Electrospun ZnFe2O4 Nanofibers for Chemiresistive Breath Acetone Detection

UiO-66-NH 2 -PEI combined with a hand-held catalytic combustion sensor for trace acetone detection in exhaled breath

Mixed Potential Type Acetone Sensor with Ultralow Detection Limit for Diabetic Ketosis Breath Analysis