Abstract:Journal of Circuits, Systems and Computers, Ahead of Print. The fabrication complexity and cost associated with nanoscale devices are major concerns. Therefore, to address these challenges, we have introduced a mole fraction-based approach for the sensitivity analysis of a dual material control gate cavity on a source electrically doped polarity-controlled tunnel field effect transistor (DMCG-CS-ED-PC-TFET)-based biosensor for label-free detection of biomolecule species. For this purpose, a polarity bias (electrically doped) of PG-[math][math]V and PG-[math][math]V is applied for the formation of n+ drain and p+ source regions, respectively, over the thin silicon body. The proposed device structure overcomes the random dopant fluctuation issues, thereby avoiding thermal budget and fabrication complexity as compared to the conventional TFET. Moreover, the nanogap cavity is created by etching the appropriate portion at the source side oxide layer. Furthermore, we have applied a dual metal work function (M1 and M2) at the gate electrode along with hetero material [math] at the source side region to improve the sensitivity of the device by varying the mole fraction value (X). The performance of the proposed device has been evaluated in terms of variations in carrier concentration profile, electric field variation, energy band diagram, transfer ([math]) characteristics and the sensitivity in terms of drain current (I[math]), ON-state current (I[math]) and switching ratio (I[math]/I[math]). Furthermore, the sensitivity of the proposed device biosensor has been investigated by considering nanocavity dimensions, practical challenges such as various fill factors, and various step profiles generated from steric hindrance. For this purpose, different neutral biomolecules such as Biotin ([math]), APTES ([math]), Keratin ([math]), Ferrocytochrome C ([math]) and Gelatin ([math]) have been considered in the etched nanocavity region. Additionally, charged biomolecules with positive (negative) charge densities at the oxide semiconductor interface below the nanocavity region have been incorporated to assess the performance of the proposed device using the Silvaco ATLAS device simulator. In this analysis, the proposed biosensor achieves a drain current sensitivity of [math] for neutral biomolecules ([math]), [math] for [math] = [math] cm[math] with [math] and [math] for [math] = [math] cm[math] and [math]. Finally, the performance of the proposed biosensor, DMCG-CS-ED-PC-TFET, exhibits higher sensitivity compared to various existing TFET-based biosensors. Hence, the proposed biosensor exhibits the potential candidate for the development of future sensing bio-equipment.

Sensitivity Measurement for Bio-TFET Considering Repulsive Steric Effects With Better Accuracy

Numerical Study of Single Molecular Charge Sensing by FET-Integrated Nanopore Biosensor

Numerical assessment of dielectrically-modulated short- double-gate PNPN TFET-based label-free biosensor

Comparative Analysis of Dielectric Engineered Tunnel FET for Biosensing Applications

Sensitivity and Reliability Assessment of Pocket Doped NCFET Based Dielectrically Modulated Biosensor Considering Steric Hindrance Effects

TFET Biosensor Simulation and Analysis for Various Biomolecules

Sensitivity analysis of bi-metal stacked-gate-oxide hetero-juncture tunnel fet with Si0.6Ge0.4 source biosensor considering non-ideal factors

Sensitivity, linearity, and noise evaluation of L‐shaped dielectrically modulated label free tunnel field‐effect transistor biosensor

Analysis of Hetero-Stacked Source TFET and Heterostructure Vertical TFET as Dielectrically Modulated Label-Free Biosensors

Recent Advances in Enhancing the Sensitivity of Biosensors Based on Field Effect Transistors

A novel TFET based nanogap high-sensitive biosensor by boosted reliability- new metric for sensitivity definition

Negative Capacitance Field Effect Transistor with Modified Gate Stack and Drain-sided cavity for Label-free Biosensing

Mole Fraction-Based Approach for Sensitivity Analysis of Dual Material Control Gate Polarity Controlled Tunnel Field Effect Transistor for Applications in Biomedical Engineering

Tweaking the Performance of Dielectric Modulated Junctionless Double Gate Metal Oxide Field Effect Transistor-Based Label-Free Biosensor

An Improved Z-Shaped Dual-Material-Gate DM-SDZ-TFET Biosensor for Label-Free Detection

Design and simulation of a germanium source dual‐metal dopingless tunnel FET as a label‐free biosensor

Modeling and Simulation of a TFET-Based Label-Free Biosensor with Enhanced Sensitivity

An Analytical Model Accounting for the Pertinence of Hybrid Tunneling in Bio-TFETs

Evaluation of Design and Performance of Biosensor Utilizing Ferroelectric Vertical Tunnel Field-Effect Transistor (V-TFET)

Negative capacitance split source tunnel FET as dielectric modulated highly sensitive biosensor

InN TFET with extended gate for high sensitivity label‐free biosensor