Abstract:Two ethylene/1-butene/1-hexene terpolymers (sample A and sample B) produced in the fluidized bed polymerization reactor with two different operation modes were fractionated by prepared temperature rising elution fractionation (P-TREF), and the structures of obtained fractions were characterized by the gel permeation chromatography (GPC), differential scanning calorimetry (DSC), nuclear magnetic resonance (13C-NMR), and successive self-nucleation and annealing thermal analysis (SSA). Meanwhile, the tensile yield strength, tensile strength, impact strength, elongation and haze of these two sampled were also tested according to the National Standard of the People 's Republic of China. Results showed that compared with sample B produced in the condensed operation mode, the sample A produced in the liquid containing operation mode had better tensile yield strength, tensile strength, impact strength, elongation and haze. The relative content and the molecular weight of the low-temperature elution fraction of sample A was lower than those of sample B, but for high-temperature elution fraction, the relative content and the molecular weight of sample A were both higher than those of sample B. Sample A possessed the broader distribution of lamellar thickness than sample B. The distribution of short branches between molecular chains of sample A was also wider than that of sample B. From the analysis of branching degree and molecular weight, sample A's short chain branches were more likely to grow in the high molecular weight chains than sample B. In summary, the sample A produced in the liquid containing operation mode has more excellent physical performance than sample B produced in the condensed operation mode, which was suitable for the preparation of high-performance stretch film material.

Local Order and Dynamics of Nanoconstrained Ethylene-Butylene Chain Segments in SEBS

Molecular Dynamics Study of the Conformation and Dynamics of Precisely Branched Polyethylene

Dynamic Mechanical and Rheological Properties of Metallocene-Catalyzed Long-Chain-Branched Ethylene/Propylene Copolymers

Chain Structure and Mechanical Properties of Ethylene Copolymers in Two Operating Modes of Fluidized Bed Polymerization Reactor

Effect of Short Chain Branching Distribution on Crystallization of Ethylene-Butene Copolymers

Segmental Orientations and Deformation Mechanism of Poly(Ether-Block-Amide) Films

Deformation and Molecular Orientation in Films of Metallocene Polypropylene, Ethylene-Butylene Rubber, and Their 80/20 (W/W) Blend Revealed by the Simultaneous Kinetic Measurement of Microscopic Infrared Dichroism, Macroscopic Stress, and Mesoscale Strain

Chain Structure, Aggregation State Structure, and Tensile Behavior of Segmented Ethylene-Propylene Copolymers Produced by an Oscillating Unbridged Metallocene Catalyst.

Simultaneous Saxs/Waxs/Dsc Studies On Microstructure Of Conventional And Metallocene-Based Ethylene-Butene Copolymers

The Effect of Architecture on the Morphology and Crystallization of Oxyethylene/oxybutylene Block Copolymers from Micelles in N-Hexane

Regulation of Physical Networks and Mechanical Properties of Triblock Thermoplastic Elastomer Through Introduction of Midblock Similar Crystalline Polymer with Multiblock Architecture

Observation Of Inverted Phases In Poly(Styrene-B-Butadiene-B-Styrene) Triblock Copolymer By Solvent-Induced Order-Disorder Phase Transition

Nanometer Scale Mechanical Study on Well Defined Nanostructured Chain Aggregation of Polyethylene

Crystallization Behavior of Copolymers of Isotactic Poly(1-butene) with Ethylene from Ziegler–Natta Catalyst: Evidence of the Blocky Molecular Structure

The transition mechanism of dynamic mechanical loss peaks and phase analysis in binary block copolymers of styrene/butadiene rubber

SIMULTANEOUS SAXS／WAXS／DSC STUDIES ON MICROSTRUCTURE OF CONVENTIONAL AND METALLOCENE-BASED ETHYLENE-BUTENE COPOLYMERS

Effect of Compositon on the Viscoelastic Relaxation and Phase Morphology of Linear Styrene-Butadiene-Styrene Triblock Copolymers

Crystalline Phases in Ethylene Copolymers Studied by Solid-State NMR and DSC

Influence of Molecular Architecture on Fast and Segmental Dynamics and the Glass Transition in Polybutadiene

Investigation of True Surface Morphology and Nanomechanical Properties of Poly(Styrene-B-Ethylene-Co-Butylene-B-Styrene) Using Nanomechanical Mapping: Effects of Composition

Structure-rheology properties of polyethylenes with varying macromolecular architectures