Abstract:Scanning probe microscopy was used to simultaneously determine the molecular chain structure and intrinsic mechanical properties, including anisotropic elastic modulus and friction, for lamellae of highly oriented high-density polyethylene (HDPE) obtained by the melt-drawn method. The molecular-scale image of the highly oriented lamellae by friction force microscopy (FFM) clearly shows that the molecular chains are aligned parallel to the drawing direction, and the periodicities along and perpendicular to the drawing direction are 0.26 and 0.50 nm, respectively. The results indicate that the exposed planes of the lamellae resulting from the melt-drawn method are (200), which is consistent with results of transmission electron microscopy and electron diffraction. Because of the high degree of anisotropy in the sample, coming from alignment of the molecular chains along the drawing direction, the measured friction force, F, determined by FFM is strongly dependent on the angle, theta, between the scanning direction and the chain axis. The force increases as theta is increased from 0 degrees (i.e., parallel to the chain axis) to 90 degrees (i.e., perpendicular to the chain axis). The structural anisotropy was also found to strongly influence the measurements of the transverse chain modulus of the polymer by the nanoindentation technique. The measured value of 13.8 GPa with transverse modulus was larger than the value 4.3 GPa determined by wide-angle X-ray diffraction, which we attributed to anisotropic deformation of the lamellae during nanoindentation measurements that was not accounted for by the elastic treatment we adopted from Oliver and Pharr. The present approach using scanning probe microscopy has the advantage that direct correlations between the nanostructure, nanotribology, and nanomechanical properties of oriented samples can be determined simultaneously and simply.

Nanometer Scale Mechanical Study on Well Defined Nanostructured Chain Aggregation of Polyethylene

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Experimental Measurement of Polyethylene Chain Modulus by Scanning Force Microscopy

A Steered Molecular Dynamcs Study of Adsorbed Polymer Chains

Molecular Dynamics Simulation of in Situ Polymerization: Chain Conformation Transition

Nanostructure and Mechanical Measurement of Highly Oriented Lamellae of Melt-Drawn HDPE by Scanning Probe Microscopy

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Molecular Dynamics Study of the Conformation and Dynamics of Precisely Branched Polyethylene

The Phase Behaviour of Single Polyethylene Chains with and Without Fixing One End

Heterogeneous Distribution of Entanglements in a Nonequilibrium Polymer Melt of UHMWPE: Influence on Crystallization Without and with Graphene Oxide

Molecular dynamics simulation of melting and crystallization processes of polyethylene clusters confined in armchair single-walled carbon nanotubes

Research Progress on Regulation of Aggregation Structure for Nascent Polyethylene

Study on single crystals of butyl branched polyethylene in the presence of electric field

AN ATOMIC FORCE MICROSCOPY STUDY ON THE AGGREGATION OF ISOTACTIC POLY(METHYL METHACRYLATE)

Molecular Dynamics Simulation of the Nascent Polyethylene Crystallization in Confined Space: Nucleation and Lamella Orientation

Molecular Dynamics Simulation on the Crystallization Behavior of Cyclic Polyethylene Affected by Functionalized Carbon Nanotubes

Branches, Tie Chains and Entanglements in Bimodal Polyethylene Single Crystals under Uniaxial Tensile Strain

Confined Polymer Crystallization and Melting Within Shell-Crosslinked Nano-Aggregates

Crystallization And Melting Of Poly(Ethylene Oxide) Confined In Nanostructured Particles With Cross-Linked Shells Of Polybutadiene

DFT Modeling of Polyethylene Chains Cross-linked by Selected n s1 and n s2 Metal Atoms

Morphological Structure of Melt-Drawn Films of Polyethylene Containing Small Amount of Copolymerized Component