Transport Phenomena for Chemical Reactor Design

Laurence A. Belfiore,Miguel-Ángel Gómez-García

DOI: https://doi.org/10.1002/0471238961.tranbelf.a01.pub2

2018-06-17

Abstract:When the thermal and mass transfer boundary layers on the outside of a catalytic pellet provide significant resistances to heat and mass transfer between the pellet and the bulk gas stream moving through a packed bed, reactor design strategies must account for these rate processes to develop accurate predictions of reactor performance. It is necessary to relate temperature and reactant conversion in the bulk gas phase to their counterparts on the external surface of the catalytic pellets. Volumetrically averaged rates of reactant consumption throughout the catalyst can be predicted in terms of the effectiveness factor and the kinetic rate law that employs temperature and molar densities on the external surface of the pellet. The methodology discussed in this chapter allows one to calculate temperature and species concentrations in the bulk gas stream and on the external surface of the catalytic pellet. Nonisothermal design strategies are illustrated specifically for the gas‐phase synthesis of methanol from carbon monoxide and hydrogen in fixed‐bed catalytic reactors. The classic Prater equation is modified to estimate the intrapellet temperature rise for exothermic reactions in macroporous catalysts by considering (i) thermal diffusion, (ii) the effect of collision integrals on ordinary molecular diffusion coefficients, and (iii) temperature effects on the enthalpy change for chemical reaction. The high‐pressure synthesis of ammonia in fixed‐bed catalytic reactors is discussed via effectiveness factor calculations for Maxwell‐Stefan multicomponent diffusion in restricted pores at small Knudsen numbers when the gas mixture exhibits significant thermodynamic nonidealities according to the Peng‐Robinson equation of state.