Abstract:Recently, the multi-level interwoven structured micro/nano fiber membranes with coarse and fine overlaps have attracted lots of attention due to their advantages of high surface roughness, high porosity, good mechanical strength, etc., but their simple and direct preparation methods still need to be developed. Herein, the multi-level structured micro/nano fiber membranes were prepared novelly and directly by a one-step electrospinning technique based on the principle of micro-phase separation caused by polymer incompatibility using polystyrene (PS) and polyvinylidene fluoride-hexafluoropropylene copolymer (PVDF-HFP) as raw materials. It was found that different spinning fluid parameters and various spinning process parameters will have a significant impact on its morphology and structures. Under certain conditions (the concentration of spinning solution is 18 wt%, the mass ratio of PS to PVDF-HFP is 1:7, the spinning voltage is 30 kV, and the spinning receiving distance is 18 cm), the PS/PVDF-HFP membrane with optimal multi-level structured micro/nano fiber membranes could be obtained, which present an average pore size of 4.38 ± 0.10 μm, a porosity of 78.9 ± 3.5%, and a water contact angle of 145.84 ± 1.70°. The formation mechanism of micro/nano fiber interwoven structures was proposed through conductivity and viscosity tests. In addition, it was initially used as a separation membrane material in membrane distillation, and its performance was preliminarily explored. This paper provides a theoretical and experimental basis for the research and development of an efficient and feasible method for the preparation of multi-level micro/nano fiber membranes.

A core–shell structured polyacrylonitrile@poly(vinylidene fluoride-hexafluoro propylene) microfiber complex membrane as a separator by co-axial electrospinning

Using coaxial electrospinning to fabricate core/shell-structured polyacrylonitrile–polybenzoxazine fibers as nonfouling membranes

Fabrication of PS/PVDF-HFP Multi-Level Structured Micro/Nano Fiber Membranes by One-Step Electrospinning

Facile fabrication of nanofiber- and micro/nanosphere-coordinated PVDF membrane with ultrahigh permeability of viscous water-in-oil emulsions

Polyvinylidene Fluoride Membrane by Novel Electrospinning System for Separator of Li-ion Batteries

The effects of electrospinning parameters on coaxial polyacrylonitrile/polyurethane nanofibers: Morphology and water vapour transmission rate

Waterproof and breathable polyacrylonitrile/(polyurethane/fluorinated-silica) composite nanofiber membrane via side-by-side electrospinning

Nanofibrous Mats of Rigid Polysaccharides Prepared by Coaxial Electrospinning

Modification and characterization of electrospun poly (vinylidene fluoride)/poly (acrylonitrile) blend separator membranes

A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator

Core–Shell Structured PAN@PU/PVDF-HFP Separators for Li-Ion Batteries

Improved performance of PVdF-HFP/PI nanofiber membrane for lithium ion battery separator prepared by a bicomponent cross-electrospinning method

Novel Ultrafine Fibrous Poly(tetrafluoroethylene) Hollow Fiber Membrane Fabricated by Electrospinning

A polymer/metal core–shell nanofiber membrane by electrospinning with an electric field, and its application for catalyst support

Preparation of porous hollow polyacrylonitrile ultrafine fibers by coaxial electrospinning

Electrospinning Of Neat And Laponite Nanoclay-Filled Poly(Vinylidene Fluoride)

A waterproof and breathable nanofibrous membrane with thermal‐regulated property for multifunctional textile application

The Study On Fabrication Of Insulated Membrane By Electrospinning

Preparation of PAN@PU coaxial electrostatic spun nanofibers for oil/water separation

Flexible core-shell PAN/CNTs@PVDF-HFP/Uio-66-NH 2 hybrid nanofibers membrane for advanced lithium-ion batteries separator

Preparation of superhydrophilic poly(acrylonitrile/acrylic acid) electrospun membrane and its application in oil/water separation