Abstract:Abstract Slurry flow (water–glass beads) through a horizontal pipe of diameter, 0.0549 m and length, 3.8 m with two particle sizes, i.e., 125- and 440-micron, has been numerically modeled and investigated based on the kinetic theory of slurry transportation. The effect of particles interaction on the pipe flow characteristics such as velocity profile, wall shear stress, vector regime, granular pressure and temperature has been evaluated at different solid concentration and flow velocity range. It is well established that the pressure drop is the key parameter for the design of efficient slurry pipeline system, which is influenced by factors such as flow velocity, slurry viscosity, solid concentration, pipe material and pipe geometry. However, to best of our knowledge, the estimation of pressure drop at different pipe roughness height and a concentration range of 40–60% is not yet established. Therefore, in the present work, the numerical simulation is carried out for slurry flow through a horizontal pipeline at different roughness heights (Rh = 10–50 micron) and Prandtl numbers, i.e., 1.34, 2.14, 3.42 and 5.83. The kinetic parameters are calculated at a flow velocity ( V m ) of 1–5 ms −1 and solid concentration ( C w ) range of 40–60%. The results and procedure of the current simulation are validated against the available experimental results in the literature. The outcomes of the present work reveals that pressure drop increases with increase in pipe roughness height for the chosen velocity and solid concentration range. In addition, the larger particle is found to have more influence on the pressure, velocity, temperature distribution for the entire range of flow velocity and solid concentration. Furthermore, settling velocity and specific energy consumption are also predicted and discussed through the slurry pipeline. The findings show that the settling velocity of particle increases with increase in particle size at different Prandtl number. The energy efficiency for solid transportation through pipeline at different Prandtl numbers and particle size are also evaluated. Based on the results, it is concluded that specific energy efficiency varies with solid concentration and particle size, i.e., higher concentration and larger particle size demonstrates higher energy consumption. Furthermore, fluid at low Prandtl number exhibits higher energy consumptions. In order to design the efficient slurry pipeline system, it is recommended that the slurry must be transported at low velocity and high Prandtl number.

Simulation and optimization of coal-water slurry suspension flow through 90° pipe bend using CFD

Computational methodology for determination of head loss in both laminar and turbulent regimes for the flow of high concentration coal ash slurries through pipeline

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

CFD Simulation and Hydrodynamics Characterization of Solids Oscillation Behavior in a Circulating Fluidized Bed with Sweeping Bend Return

Computational investigation of transportation and thermal characteristics in a bi -modal slurry flow through a horizontally placed pipe bend

Pipe bend erosion CFD modeling for two-phase liquid–solid slurry

Numerical Simulation of Gas-Liquid Flow Through a 90° Duct Bend with a Gradual Contraction Pipe

Numerical Simulation of Mixing Capability in Coal-Slurry Mixing Tank

CFD analysis of the erosion wear through 90° bend of different area ratio at high slurry concentration

Suppression of the Secondary Flows in A Bend Pipe Using Navier-Stokes Solver and Evolutionary Algorithms

Cfd Simulation of the Unsteady Flow of A Single Coal Log in A Pipe

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

CFD Modelling of Swirling Mechanism to Reduce Erosion of Pipe Bend in Pneumatic Conveying System

Estimation of energy consumption and transportation characteristics for slurry flow through a horizontal straight pipe using computational fluid dynamics

Optimizing pressure drop in 90° bend horizontal pipelines for dense slurry flow: A response surface methodology approach

Fluid-Structure Interaction of Two-Phase Flow Passing Through 90° Pipe Bend under Slug Pattern Conditions

Numerical Investigation of the Impacts of Large Particles on the Turbulent Flow and Surface Wear in Series-Connected Bends

Numerical Investigation of Slurry Pressure Drop at Different Pipe Roughness in a Straight Pipe Using CFD

Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method

CFD Modelling of Swirling Device to Study Bend Erosion Rate at Different Bend Angles in Pneumatic Conveying System

Analyze of pipeline transport characteristics and optimization method of structural parameters in slurry shield circulation system with spiral structure