Mesoporous Silica Engineered Lithium Metal Batteries: Unraveling the Mechanisms behind Dendrite Inhibition and Enhanced Electrochemical Performance
Jungho Lee,Yelim Kwon,Chenglin Cui,Hansol Kim,JI Man Kim
DOI: https://doi.org/10.1149/ma2023-024751mtgabs
2023-12-22
ECS Meeting Abstracts
Abstract:Lithium metal batteries are widely considered to be a next-generation battery technology due to their high energy density, fast charging capability, and potential to power a wide range of applications, from portable electronics to electric vehicles. Compared to conventional lithium-ion batteries, which use graphite as the anode material, lithium metal batteries have the potential to offer significantly higher energy density. This is because lithium metal has a much higher theoretical capacity than graphite, meaning it can store more energy per unit weight or volume. As a result, lithium metal batteries could potentially offer longer run times and smaller form factors than lithium-ion batteries, which are already widely used in consumer electronics and electric vehicles. In addition to their high energy density, lithium metal batteries also offer fast charging capabilities. This is because the lithium metal anode can be charged more quickly than the graphite anode used in conventional lithium-ion batteries. This could enable faster charging times for electric vehicles and other applications, reducing the time required for recharging and improving their overall usability. However, one of the major challenges with lithium metal batteries is dendrite growth, which can occur when lithium metal ions deposit unevenly on the surface of the anode during charging. These dendrites are needle-like structures that can penetrate the separator and cause short-circuits, leading to reduced battery performance and safety issues. As a result, much of the research on lithium metal batteries has focused on developing strategies to prevent dendrite growth, such as using coatings or electrolytes with additives that can stabilize the lithium metal anode. Despite these challenges, lithium metal batteries continue to be a promising next-generation battery technology. Researchers are working on improving their energy density, charging speed, and safety, and they are exploring a range of applications, from portable electronics to electric vehicles and grid-scale energy storage. If these challenges can be overcome, lithium metal batteries could revolutionize the energy storage industry and enable a wide range of new and exciting applications. To address this issue, we have explored the use of various coatings on the lithium metal anode to prevent dendrite growth. In this study, ordered mesoporous silica with different pore sizes and pore structures, such as SBA-15 and KIT-6, were used as coatings between the lithium metal anode and separator. SBA-15 and KIT-6 are two types of mesoporous silica materials that are widely used in various applications due to their unique properties. The synthesis of these materials involves the use of templates to control the pore size and structure. They are synthesized using a combination of a surfactant(pluronic P123 or cetyltrimethylammonium bromide;CTAB) as the template and tetraethyl orthosilicate(TEOS) as the silica source. The synthesis involves mixing a solution of surfactant and TEOS in acidic conditions, followed by aging and calcination steps. The resulting materials have a highly ordered hexagonal pore structure(SBA-15) and body-centered cubic pore structure(KIT-6) with a pore size ranging from 5 to 20 nm. By coating the surface of the lithium metal with a uniform pore structure material such as ordered mesoporous silica, dendrite growth can be suppressed and lithium deposition can occur more uniformly. The uniform pore structure material acts as a physical barrier to lithium ion diffusion and helps to control the deposition of lithium ions onto the surface of the lithium metal. When lithium ions are deposited onto the surface of the lithium metal, they can form a layer of lithium that can grow and become thick over time. If the lithium layer is too thick, it can become unstable and form dendrites. However, the uniform pore structure material can help to limit the thickness of the lithium layer and promote the deposition of lithium ions in a more uniform manner, thus reducing the likelihood of dendrite formation. Additionally, the uniform pore structure material can help to reduce the concentration of lithium ions at the surface of the lithium metal, which is another factor that can contribute to dendrite growth. By limiting the concentration of lithium ions at the surface, the uniform pore structure material can help to prevent the formation of high-concentration regions that can promote dendrite growth. Overall, the mechanism by which a uniform pore structure material can suppress dendrite growth involves controlling the deposition of lithium ions onto the surface of the lithium metal, limiting the thickness of the lithium layer, and reducing the concentration of lithium ions at the surface. These factors help to promote more uniform lithium deposition and prevent the formation of dendrites, leading to improved battery performance and safety.