Abstract:Abstract Precision machining is becoming more and more important with the increasing demands on surface quality for various components. This applies, for example, to mirror components in micro-optics or cooling components in microelectronics. Copper is a frequently used material for this purpose, but its mechanical properties make it difficult to machine. In this study, a process strategy for finishing copper surfaces with batch-manufactured micro-grinding tools in an electrochemically assisted grinding process is demonstrated. The tool heads are manufactured from a polyimide-abrasive-suspension and silicon as a carrier substrate using microsystems technology. The matching shafts are milled from aluminium. The tools are then used on pure copper and oxidised copper surfaces. By using finer abrasives grains (1.6–2.4 μm instead of 4–6 μm) than previously, similar surface roughness values could be achieved ( R a = 0.09 ± 0.02 μm, R z = 1.94 ± 0.73 μm) with the same grinding process. An optimised grinding process that combines the use of rough and fine tools, on the other hand, achieves significantly better surface finishes in just four grinding iterations ( R a = 0.02 ± 0.01 μm, R z = 0.83 ± 0.21 μm). In order to achieve a further increase in surface quality, this optimised grinding process is combined with the anodic oxidation of the copper workpieces. The surface modification is done to increase the machinability of the surface by creating an oxide layer. This is confirmed by the results of scratch tests carried out, which showed less force acting on the tool during machining with the oxide layer than with a pure copper surface. To realise this within the machine tool, an electrochemical cell is shown that can be integrated into the machine so that the oxidation can be carried out immediately before the grinding process. The copper layers produced inside the electrochemical cell in the machine tool show similar characteristics to the samples produced outside. Processing the oxidised samples with the optimised grinding process led to a further reduction of about 17% in the R z values ( R a = 0.03 ± 0.01 μm, R z = 0.69 ± 0.20 μm). The combination of the shown grinding process and the integration of anodic oxidation within the machine tool for the surface modification of copper workpieces seems to be promising to achieve high surface finishes.

Development of a magnetically driven abrasive polishing process for additively manufactured copper structures

Surface Enhancement of Additively Manufactured Bone Plate Through Hybrid-Electrochemical Magnetorheological Finishing Process

Detailed characterisation of batch-manufactured flexible micro-grinding tools for electrochemical assisted grinding of copper surfaces

Synthesis of polishing fluid and novel approach for nanofinishing of copper using ball-end magnetorheological finishing process

Optimizing Parameters for Magnetorheological Finishing Supersmooth Surface

Application of electrochemical polishing in surface treatment of additively manufactured structures: A review

Process optimization and finite element modeling in magnetorheological abrasive finishing of SS-316L with surface characterization

Abrasive and non-conventional post-processing techniques to improve surface finish of additively manufactured metals: a review

Experimental study of rectangular-curved magnet–based magnetorheological finishing tool for copper cylindrical workpiece

An overview of magnetorheological polishing fluid applied in nano-finishing of components

Electrochemical magnetorheological finishing for hard-to-machine functional materials with nanometer-scaled surface roughness

Multi-pole magnetorheological shear thickening polishing on inner surface of aluminum alloy slender tubes

Experimental Investigation on Magnetic Abrasive Finishing for Internal Surfaces of Waveguides Produced by Selective Laser Melting

Surface Roughness and Material-Removal Rate with Magnetorheological Finishing Without Subsurface Damage of the Surface

Research progress of magnetorheological polishing technology: a review

Polishing of additive manufactured metallic components: retrospect on existing methods and future prospects

A new polishing method for complex structural parts: moist particle electrolyte electrochemical mechanical polishing (MPE-ECMP)

A Novel Laser-Aided Machining and Polishing Process for Additive Manufacturing Materials with Multiple Endmill Emulating Scan Patterns

Advanced polishing, grinding and finishing processes for various manufacturing applications: a review

Ultrasonic assisted electropolishing to reduce the surface roughness of laser powder bed fusion based additively manufactured copper heat exchanger components

Magnetorheological Finishing of Optical Surface Combined with Symmetrical Tool Function