Abstract:During the operation of a steam turbine, its structural elements are subjected to significant thermal and mechanical loads. The consequence of the long-term effect of such a load is the accumulation of scattered fatigue damage to the material of the structural elements of the steam turbine, which is localized over time in the form of fatigue cracks of various types. Evidence of this is several accidents and catastrophic failures of steam turbines due to significant fatigue damage to the shafting. The localization of damage in turbine rotors is facilitated by stress concentration in the gouges and fillets, as well as damage to the surface layer of the rotors during the thermomechanical treatment stage since all metal processing operations (forging, turning and milling, heat treatment) are accompanied by plastic deformation of the material. One of the reasons for the long-term accumulation of fatigue damage in the structural elements of steam turbines is thermal stresses, which can reach dangerous values during turbine startup operations. In certain parts of the rotors, these stresses are sufficient to cause scattered fatigue damage to the material (the so-called thermoplasticity), especially when starting the turbine from a cold state. In the case of crack initiation, the thermal stresses are all the more sufficient for its further intensive development even when starting the turbine from uncooled and hot states, which are less damaging than starting from the cold state. To study the intensity of crack growth in the turbine rotor due to thermal stresses arising during turbine startup, a computational model based on using a finite element model of the shaft of the K-200-130 steam turbine and fracture mechanics approaches is proposed. Studies based on the proposed computational model have demonstrated the ability to predict the process of crack growth in the rotor due to turbine startup from different thermal states and assess its danger to structural integrity. The initial size of the internal annular crack was determined, which has the potential for further intensive growth under the influence of thermal stresses.

Metallographic and Materials Evaluation of a Cracked Radial Steam Turbine Rotor

Fatigue Crack Propagation Analysis in an Aero-Engine Turbine Disc Using Computational Methods and Spin Test

Degradation Behavior of Microstructures and Mechanical Properties of GTD111 Turbine Blade After Long-Term Service

Study on Fatigue Degradation Behavior of a Cracked Rotor Subjected to Lateral Vibration

Microstructure Degradation of Service-Exposed Turbine Blades Made of Directionally Solidified DZ125 Superalloy

Patterns of Transverse Crack Growth in a Steam Turbine Rotor Model Under Dynamic Loading

Estimation of Fatigue Crack Growth at Transverse Vibrations of a Steam Turbine Shaft

Experimental Investigation of Failure Behavior of the Cracked 17-4PH Steel Blades in a Top Gas Energy Recovery Turbine

Evaluation of Gas Turbine Hot Section Blade Cracking under Oxidation, TMF, and Creep Conditions

Failure Reason of the Blade of Top Gas Energy Recovery Turbine

Study of cracks in the last-stage rotor blade of a steam turbine and the corrosion fatigue properties of its materials

Patterns of Growth of an Internal Annular Crack Under the Influence of Thermal Stresses During Turbine Startup

Damage evaluation for an aged turbine rotor material using creep crack growth tests

Fracture Analysis of a 135MW Steam Turbine's Last Stage Blade

Dynamics of Slant Cracked Rotor for a Steam Turbine Generator System

Analysis on Premature Fracture of X12CrMoWVNbN10-1-1 Steel for USC Steam Turbine Rotors

On the Creep Fatigue and Creep Rupture Behaviours of 9–12% Cr Steam Turbine Rotor

Failure Analysis of the Final Stage Blade in Steam Turbine

Analysis on corrosion fatigue cracking mechanism of 17-4PH blade of low pressure rotor of steam turbine

Effect of Microstructure on Fatigue Crack Propagation Behavior in a Steam Turbine Rotor Steel

An Investigation Of The Failure Of Low Pressure Steam Turbine Blades