Efficient conversion of 5-hydroxymethylfurfural to high-value chemicals by chemo- and bio-catalysis

Haian Xia,Siquan Xu,Hong Hu,Jiahuan An,Changzhi Li

DOI: https://doi.org/10.1039/c8ra05308a

IF: 4.036

2018-01-01

RSC Advances

Abstract:5-hydroxymethylfurfural (HMF) is a very important versatile platform compound derived from renewable biomass.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Efficient One-Pot Production of 5-Hydroxymethylfurfural from Glucose in an Acetone–Water Solvent

Haoxiang Zhu,Youdi Zhang,Xusheng Guo,Youwei Cheng,Lijun Wang,Xi Li

DOI: https://doi.org/10.1021/acs.iecr.2c00502

2022-01-01

Industrial & Engineering Chemistry Research

Abstract:5-Hydroxymethylfurfural (HMF) is a high-valuebiomass-derived platform chemical derived from renewablebiomass, which is a great alternative to petroleum-based chemicals;however, it cannot be produced on a large scale at present becauseof the limitation of a low HMF yield and costly production. In thiswork, an experimental study of one-pot production of HMF fromglucose in an acetone-water solvent was conducted. The effects ofinorganic salts (in specific, NaCl) on miscible solvents were studiedbecause inorganic salts could affect the phase structure of solvents.We also study the influence of the ratio between Lewis acid andBronsted acid (L/B) on the dehydration reaction. After parameteroptimization experiments, up to 64.5% HMF yield was obtained at the condition ofC0= 1.25 w/v %,CAlCl3= 1.25 w/v %,CHCl=10mmolmiddotL-1,T= 160 degrees C, ando/a= 80/20, and the optimized L/B was 1.25 kgmiddotmol-1. Finally, an economic and efficient HMFproduction process including HMF purification and catalyst recycling was proposed; the HMF product could be produced andseparated with high recovery (similar to 88%) and purity (similar to 85%) in the process. Ourfindings and analysis would provide support for thechoice of the reaction system and bifunctional catalyst synthesis in the subsequent industrial demonstration development
Efficient Conversion of Chitin into 5-Hydroxymethylfurfural Via a Simple Formylation Step under Mild Conditions

Chunxiao Gong,Zhaoyang Ju,Kuichuan Sheng,Ximing Zhang

DOI: https://doi.org/10.1039/d3gc00503h

IF: 9.8

2023-01-01

Green Chemistry

Abstract:A novel, sustainable, and efficient HMF production route from chitin was achieved via a simple formylation step under mild conditions.
Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H2O media

Caidi Jin,Ning Xiang,Xiao Zhu,E. Shuang,Kuichuan Sheng,Ximing Zhang

DOI: https://doi.org/10.1016/j.apcatb.2020.119799

2021-01-01

Abstract:5-hydroxymethylfurfural (HMF) can be widely converted into value-added chemicals and fuels production. Herein, we reported a sustainable and efficient approach for synthesizing HMF directly from cellulose. Facile formylation of cellulose with green and recyclable formic acid was developed for cellulose formate (CF) production. CF with special net-like structure and high degree of formyl substitution was prepared. The resultant CF exhibited excellent catalytic conversion and selectivity for HMF production comparable to monomeric glucose as reactant in dimethyl sulfoxide (DMSO)-H2O media. In our work, we presented molecular dynamics simulations to elaborate the preferential coordination of DMSO around formyl group, which promoted the solvation of formylated substrate in DMSO-H2O mixture, and the HMF yielded could be protected by DMSO without further degradation to levulinic acid or humins.
Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Hui Yang,Feng Zhou,Hao Chen,Jing Li,Huixia Ma,Kequan Chen,Xiuyang Lu,Pingkai Ouyang,Jie Fu

DOI: https://doi.org/10.1021/acs.iecr.9b06392

2020-01-01

Industrial & Engineering Chemistry Research

Abstract:With the dwindling availability of fossil fuel resources and the dramatic increase in demand, 5-methoxymethylfurfural (MMF) obtained from renewable biomass resources has great potential as a fossil fuel alternative. In this work, a high yield (80.5%) of MMF was obtained from fructose catalyzed by Amberlyst-15 with the assistance of dimethyl sulfoxide (DMSO) in methanol at 100 degrees C for 10 h. Based on a detailed investigation of the reaction mechanism through the effects of DMSO, Amberlyst-15, reaction time, and reaction temperature on MMF yield and the existence of intermediates proved by FTIR, a two-step pathway was proposed: (1) DMSO and H ion on Amberlyst-15 act as a joint-catalyst [DMSOH](+), facilitating the dehydration of fructose into 5-hydroxymethylfurfural (HMF), and (2) [DMSOH](+) assists the etherification of HMF with methanol into MMF, which is the rate-determining step. This finding expands the concept of biomass conversion into biomass fuels and plays a vital role in catalyst screen and design, reaction medium selection, and industrial applications.
Conversion of 5-hydroxymethylfurfural to chemicals: A review of catalytic routes and product applications

Qing-Shan Kong,Xing-Long Li,Hua-Jian Xu,Yao Fu

DOI: https://doi.org/10.1016/j.fuproc.2020.106528

IF: 8.129

2020-12-01

Fuel Processing Technology

Abstract:Biomass is the sole renewable organic carbon resource in nature. Conversion of Biomass can produce a series of platform molecules. As an essential multi-purpose bioderived furanic platform compound, 5-hydroxymethylfurfural (HMF) can be effectively transformed into a variety of value-added derivatives due to its rich chemistry and potential availability, which is an ideal renewable alternative to fossil fuels. This review highlights recent advances in the development of efficient catalytic systems for the conversion of HMF, especially heterogeneous catalysts. Heterogeneous catalysts have advantages in facile separation and recovery, tunable performance by adjusting catalyst structures. Simultaneously, we mainly focus on the application of downstream products in material monomers, pharmaceutical intermediates, and fuels. Furthermore, a few potential research trends are also proposed, in order to provide some useful ideas for the further exploration of the utilization and conversion of HMF in a much simple, efficient, and economical way.

energy & fuels,engineering, chemical,chemistry, applied
Structural Designs and Mechanism Insights into Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Jing Lei,Huijie Zhang,Jian Yang,Jia Ran,Jiqiang Ning,Haiyan Wang,Yong Hu

DOI: https://doi.org/10.1016/j.jechem.2024.08.066

IF: 13.1

2024-01-01

Journal of Energy Chemistry

Abstract:Biomass conversion offers an efficient approach to alleviate the energy and environmental issues. Electrochemical oxidation of 5-hydroxymethylfurfural (HMF) has attracted tremendous attention in the latest few years for the mild synthesis conditions and high conversion efficiency to obtain 2,5-furan dicarboxylic acid (FDCA), but there still remain problems such as limited yield, short cycle life, and ambiguous reaction mechanism. Despite many reviews highlighting a variety of electrocatalysts for electrochemical oxidation of HMF, a detailed discussion of the structural modulation of catalyst and the underlying catalytic mechanism is still lacking. We herein provide a comprehensive summary of the recent development of electrochemical oxidation of HMF to FDCA, particularly focusing on the mechanism studies as well as the advanced strategies developed to regulate the structure and optimize the performance of the electrocatalysts, including heterointerface construction, defect engineering, single-atom engineering, and in situ reconstruction. Experimental characterization techniques and theoretical calculation methods for mechanism and active site studies are elaborated, and challenges and future directions of electrochemical oxidation of HMF are also prospected. This review will provide guidance for designing advanced catalysts and deepening the understanding of the reaction mechanism beneath electrochemical oxidation of HMF to FDCA.
Chemical transformations of 5-hydroxymethylfurfural to highly added value products: Present and future

Zhiwei Jiang,Yongjian Zeng,Di Hu,Ruichao Guo,Kai Yan,Rafael Luque

DOI: https://doi.org/10.1039/d2gc03444a

IF: 9.8

2022-11-25

Green Chemistry

Abstract:The synthesis of fuels, fuel additives, commercial and potential products from the platform molecules generated by the hydrolysis of the lignocellulosic biomass is a promising strategy toward the utilization of renewable feedstocks. Significant advances have been made on the various transformations (e.g., hydrogenation, oxidation, aldol-condensation, rehydration, amination, polymerization, etherification and decarbonylation) of biomass-derived 5-hydroxymethylfurfural (HMF). This review firstly gives an overview of these various transformations of HMF to produce a number of fuels as well as chemicals, wherein the fundamental aspects of reaction mechanisms, recent progress and challenges are highlighted, respectively. Different types of catalysts have also been summarized and compared in Tables. One objective is to comment the synthesis of value-added commercial and potential chemical (e.g., furan-based polyester platform 2,5-furandicarboxylic acid (FDCA), 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), 2,5-diformylfuran (DFF)). Another purpose of the review is to comment fuels and fuel additives, including gasoline blendstock 2,5-dimethylfuran (DMF), ethyl levulinate (EL), gamma-valerlactone (GVL), methylfuran (MF) and so on. These obtained chemicals could replace the products from petrochemical resources, reducing the CO2 emission.

chemistry, multidisciplinary,green & sustainable science & technology
5‐hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Chunlin Chen,Mingxin Lv,Hualei Hu,Liyuan Huai,Bin Zhu,Shilin Fan,Qiuge Wang,Jian Zhang

DOI: https://doi.org/10.1002/adma.202311464

IF: 29.4

2024-05-31

Advanced Materials

Abstract:Biomass assumes an increasingly vital role in the realm of renewable energy and sustainable development due to its abundant availability, renewability, and minimal environmental impact. Within this context, 5‐hydroxymethylfurfural (HMF), derived from sugar dehydration, stands out as a critical bio‐derived product. It serves as a pivotal multifunctional platform compound, integral in synthesizing various vital chemicals, including furan‐based polymers, fine chemicals, and biofuels. The high reactivity of HMF, attributed to its highly active aldehyde, hydroxyl, and furan ring, underscores the challenge of selectively regulating its conversion to obtain the desired products. This review highlights the research progress on efficient catalytic systems for HMF synthesis, oxidation, reduction, and etherification. Additionally, it outlines the techno‐economic analysis (TEA) and prospective research directions for the production of furan‐based chemicals. Despite significant progress in catalysis research, and certain process routes demonstrating substantial economics, with key indicators surpassing petroleum‐based products, a gap persists between fundamental research and large‐scale industrialization. This is due to the lack of comprehensive engineering research on bio‐based chemicals, making the commercialization process a distant goal. These findings provide valuable insights for further development of this field. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Recent advances in the conversion of furfural into bio-chemicals through chemo- and bio-catalysis

Xu Zhang,Siquan Xu,Qinfang Li,Guilin Zhou,Haian Xia

DOI: https://doi.org/10.1039/d1ra04633k

IF: 4.036

2021-01-01

RSC Advances

Abstract:Furfural is a promising renewable platform molecule derived from hemi-cellulose, which can be further converted to fossil fuel alternatives and valuable chemicals due to its highly functionalized molecular structure.

chemistry, multidisciplinary
Catalytic Systems for 5-Hydroxymethylfurfural Preparation from Different Biomass Feedstocks: A Review

Jiao Tao,Yunchuan Pan,Haiyang Zhou,Yufei Tang,Guoquan Ren,Zhihao Yu,Jiaxuan Li,Rui Zhang,Xiaoyun Li,Yina Qiao,Xuebin Lu,Jian Xiong

DOI: https://doi.org/10.3390/catal14010030

IF: 3.9

2023-12-29

Catalysts

Abstract:The preparation of high-value-added platform compounds from biomass materials provides an important method for solving fossil energy shortages. Known as the “sleeping giant”, 5-HMF is one of the most important biomass platform compounds with promising applications. At present, raw materials for the preparation of 5-HMF mainly comprise sugar compounds and non-food biomass. The current systems for preparing 5-HMF are disadvantaged by poor selectivity and a low conversion rate. This paper focuses on the catalytic mechanisms and catalytic systems for the synthesis of 5-HMF from different biomass feedstocks and reviews a series of existing techniques for the preparation of 5-HMF. Catalytic systems for the synthesis of 5-HMF from different feedstocks are also discussed in depth, providing theoretical support for its subsequent in-depth study. The development of efficient catalysts and catalytic systems for the conversion of polysaccharide raw materials into 5-HMF is anticipated.

chemistry, physical
Recent advances in catalytic conversion of biomass to 5-hydroxymethylfurfural and 2, 5-dimethylfuran

Haiyong Wang,Changhui Zhu,Dan Li,Qiying Liu,Jin Tan,Chenguang Wang,Chiliu Cai,Longlong Ma

DOI: https://doi.org/10.1016/j.rser.2018.12.010

IF: 16.799

2019-04-01

Renewable and Sustainable Energy Reviews

Abstract:With the growing shortage of fossil energy and the increasing of concerns over global climate changes and environmental problems have driven the development of alternative energy sources. Recently, great interest has been oriented towards the development of sustainable resources, especially the utilization of lignocellulosic biomass, a renewable and the most abundant source of biomass originating from plant photosynthesis in nature. Catalytic conversion of renewable cellulosic biomass can produce a series of compounds such as 5-hydroxymethylfurfural (HMF) and 2,5-dimethylfuran (DMF) which are important platform compounds and ideal renewable alternative to fossil fuels. To obtain the renowned bio-based platform molecules, various catalysts and reaction systems have been used in the past decade years. To fully understand current biomass to HMF and DMF development, it is necessary to have an overview and comparison of different homogeneous and heterogeneous catalysts. The reaction systems also exhibit a remarkable impact on the yield and distribution of products with different catalysts. General trends and future research directions of using biomass for HMF, DMF production are also discussed systematically.

energy & fuels,green & sustainable science & technology
A Cobalt Catalyst for Reductive Etherification of 5-Hydroxymethyl-furfural to 2,5-Bis (methoxymethyl)furan under Mild Conditions

Xing-Long Li,Kun Zhang,Shi-Yan Chen,Chuang Li,Feng Li,Hua-Jian Xu,Yao Fu

DOI: https://doi.org/10.1039/c7gc03072j

IF: 9.8

2018-01-01

Green Chemistry

Abstract:Conversion of platform molecule 5-hydroxymethylfurfural (HMF) into high-value-added derivatives has attracted significant interest.
Carbon-Based Catalytic Materials for Aerobic Oxidative Transformation of 5-Hydroxymethylfurfural: Advancements, Challenges, and Opportunities

Chao Xie,Zhiwei Jiang,Yayun Pang,Chenglei Xiao,Jinliang Song

DOI: https://doi.org/10.1039/d4gc01621a

IF: 9.8

2024-05-15

Green Chemistry

Abstract:5-Hydroxymethylfurfural (HMF), an attractive biomass-based platform compound, holds significant promise as a renewable resource for the production of diverse value-added chemicals. Of particular interest is the selective oxidation of HMF, which enables the production of valuable compounds such as 2,5-diformylfuran (DFF), 2,5-furandicarboxylic acid (FDCA), and furan-2,5-dimethylcarboxylate (FDMC). Carbon-based catalytic materials have been recognized as highly effective carriers or catalysts in organic conversions, with their catalytic activity being easily modulated through compositional and structural modifications. This comprehensive review aims to provide a summary of recent advancements in utilizing carbon-based materials for the aerobic oxidation of HMF into DFF, FDCA, and FDMC in the past five years. Additionally, an outlook is presented to identify the challenges and opportunities in this fascinating and vital research domain.

chemistry, multidisciplinary,green & sustainable science & technology
Recent advance on the catalytic system for efficient production of biomass-derived 5-hydroxymethylfurfural

Di Hu,Man Zhang,Hong Xu,Yuchen Wang,Kai Yan

DOI: https://doi.org/10.1016/j.rser.2021.111253

IF: 16.799

2021-09-01

Renewable and Sustainable Energy Reviews

Abstract:Conversion of biomass-derived sources into 5-hydroxymethylfurfural (HMF), a value-added platform chemical, has attracted great research interest motivated by the raising economic and environmental incentives. This review assesses the recent advance on the catalytic system of HMF production, with a main focus on the function of emerging catalysts, solvent system, and advanced reactor. A general overview of HMF production, the correlation between the catalyst physicochemical properties, with a special attention on the acidity property, and the catalytic activity under various reaction parameters, such as solvent or reactor have been summarized and compared. Besides, the reaction mechanism of HMF synthesis was discussed in details, which is helpful for designing novel catalyst with better catalytic activity and improving the stability. Research efforts to clarify the interactions among co-catalysts/co-solvents and between catalysts and solvents have been also classified. Future efforts on developing a synergistic catalytic system for biomass valorization has been pointed out.

energy & fuels,green & sustainable science & technology
Recent Advances in Heterogeneous-catalysis Transformation of 5-Hydroxymethyfurfural to 2,5-Dimethylfuran

ZHANG Ying,JIA Wenda,FU Yao

DOI: https://doi.org/10.3969/j.issn.0253-2417.2017.04.001

2017-01-01

Abstract:2,5-Dimethylfuran(DMF)from renewable biomass is considered as a promising new generation of alternative fuel.DMF has many desirable characteristics and can be directly used in spark ignition(SI)engine or used after mixing with gasoline.The conversion from biomass based platform molecule,5-hydroxylmethylfurfural(HMF),to DMF has attracted great attention all over the world.Herein,the catalytic reaction mechanisms about the conversion methods from HMF to DMF are elaborated.The state-of-the-art of catalytic conversion approaches for the production of DMF from HMF is systematically summarized and discussed,focusing on noble metal,base metal,synergetic duplex metal catalytic systems.
Advances in Selective Electrochemical Oxidation of 5‐Hydroxymethylfurfural to Produce High‐Value Chemicals

Lei Guo,Xiaoxue Zhang,Li Gan,Lun Pan,Chengxiang Shi,Zhen‐Feng Huang,Xiangwen Zhang,Ji‐Jun Zou

DOI: https://doi.org/10.1002/advs.202205540

IF: 15.1

2022-12-10

Advanced Science

Abstract:This review provides a deeper understanding of mechanism for electrochemical oxidation of 5‐hydroxymethylfurfural (HMF), the design of electrocatalyst and reactor, and points out the possible important development orientation, which is expected to promote the economical and efficient electrochemical conversion of biomass for industrial applications. The conversion of biomass is a favorable alternative to the fossil energy route to solve the energy crisis and environmental pollution. As one of the most versatile platform compounds, 5‐hydroxymethylfural (HMF) can be transformed to various value‐added chemicals via electrolysis combining with renewable energy. Here, the recent advances in electrochemical oxidation of HMF, from reaction mechanism to reactor design are reviewed. First, the reaction mechanism and pathway are summarized systematically. Second, the parameters easy to be ignored are emphasized and discussed. Then, the electrocatalysts are reviewed comprehensively for different products and the reactors are introduced. Finally, future efforts on exploring reaction mechanism, electrocatalysts, and reactor are prospected. This review provides a deeper understanding of mechanism for electrochemical oxidation of HMF, the design of electrocatalyst and reactor, which is expected to promote the economical and efficient electrochemical conversion of biomass for industrial applications.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Efficient Conversion of Glucose to Hydroxymethylfurfural: One‐pot Brønsted Base and Acid Promoted Selective Isomerization and Dehydration

Minakshi Altia,Pazhamalai Anbarasan

DOI: https://doi.org/10.1002/asia.202400392

2024-06-10

Chemistry - An Asian Journal

Abstract:Development of elegant, selective, and efficient strategies for the production of value‐added platform chemicals from renewable feedstocks are in high demand to achieve the future needs and sustainable goals. In this context, an efficient acid‐promoted synthesis of highly valuable hydroxymethylfurfural (HMF) has been demonstrated from glucose, a major constituent of lignocellulosic biomass. The major challenge in the conversion of glucose to HMF is the selective isomerization of glucose to ketose, which in the present work has been successfully addressed through the amine‐mediated rearrangement of glucose to aminofructose under Amadori rearrangement. Importantly, subsequent dehydration step affords HMF and regenerates the amine employed in the first step, which could be readily recovered. In addition, scale‐up and successful integration in to one‐pot synthesis of HMF proves the efficiency and applicability of the present transformation in large scale application. In addition, the method was also successfully extended to other monosaccharides and disaccharides to produce HMF.

chemistry, multidisciplinary
Advances on the catalytic hydrogenation of biomass-derived furfural and 5-hydroxymethylfurfural

Jun ZHANG,Dan-ni LI,Hao-ran YUAN,Shu-rong WANG,Yong CHEN

DOI: https://doi.org/10.1016/S1872-5813(21)60135-4

2021-01-01

Journal of Fuel Chemistry and Technology

Abstract:In recent years, the conversion of biomass-derived platform compounds into a variety of high value fuel and chemical products has attracted increasing attention from researchers. 5-Hydroxymethylfurfural (HMF) and furfural (FFR) belong to a class of important biomass-derived platform chemicals. The molecular structure of HMF and FFR is consisted of aldehyde group, furan ring and other functional groups, which endow them with unique chemical properties. In this paper, the research advances on the catalytic hydrogenation of HMF and FFR using various hydrogen sources, such as hydrogen, alcohol, silanes and formic acid, have been reviewed in detail. In addition, the main influencing factors like catalyst type and reaction conditions on the hydrogenation process as well as the reaction mechanism are discussed in depth. Meanwhile, research foreground in the catalytic hydrogenation of HMF/FFR has been prospected.
A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion

Yuan Zhao,Kaifeng Lu,Hao Xu,Lingjun Zhu,Shurong Wang

DOI: https://doi.org/10.1016/j.rser.2021.110706

IF: 16.799

2021-04-01

Renewable and Sustainable Energy Reviews

Abstract:Furan energy platform compounds including furfural and 5-hydroxymethylfurfural (HMF), can be produced by hydrothermal conversion of biomass. After hydrodeoxygenation, these furans can be converted into value-added chemicals and liquid fuels. This will help achieve efficient utilization of biomass and alleviate the environment issues caused by the overuse of fossil fuels. This review introduces the recent progress in the production of furfural and HMF from biomass and its derived sugars in homogeneous catalytic systems. The topics mainly include catalytic mechanisms, catalytic systems, and conversion processes. The synergistical catalytic effect of Lewis acid and Brønsted acid is crucial in furan production. Therefore, the development of metal salts and ionic liquids, which exhibit both kinds of acidity, has been the focus of recent attention. The type and composition of catalyst also play key roles in producing furan products. Thus, the design and improvement of the catalyst based on mechanism research will be helpful to the highly selective hydrothermal conversion of biomass. Reasonable selection of solvent system can improve the conversion efficiency significantly and avoid the occurrence of various side reactions. Especially, the online extraction of the biphasic solvent system can prevent some certain products from being consumed by the secondary reaction. Till now, the lab-scale homogeneous conversion process has been fully developed. Future research will focus on the magnification and commercialization of laboratory process. The key technical problems in the commercialization process is how to increase the recyclability, economy and eco-friendly property of the reaction system under the premise of satisfying product yield.

energy & fuels,green & sustainable science & technology
Furfural: A Promising Platform Compound for Sustainable Production of C4 and C5 Chemicals

Xiaodan Li,Tiefeng Wang,Pei-Song Jia

DOI: https://doi.org/10.1021/ACSCATAL.6B01838

2016-10-11

Abstract:Furfural is a promising renewable platform compound derived from lignocellulosic biomass that can be further converted to biofuels and biochemicals. The highly functionalized molecular structure of furfural makes it a desired raw material for the sustainable production of value-added chemicals containing oxygen atoms. The conversion of furfural to C4 and C5 chemicals by various catalytic processes is reviewed. The C5 chemicals are mainly produced through sequential steps of selective hydrogenation and/or hydrogenolysis, while most of the C4 chemicals are synthesized with selective oxidation as the first step. This review divides the chemical products from furfural into several groups according to their carbon numbers and synthesis routes, with emphasis on the catalysts and reaction mechanisms. The applications of these chemicals and their traditional production from fossil feedstocks have also been added as background information. Additionally, recent advances in the development of heterogeneous catalysts...

Environmental Science,Chemistry

Efficient conversion of 5-hydroxymethylfurfural to high-value chemicals by chemo- and bio-catalysis

Efficient One-Pot Production of 5-Hydroxymethylfurfural from Glucose in an Acetone–Water Solvent

Efficient Conversion of Chitin into 5-Hydroxymethylfurfural Via a Simple Formylation Step under Mild Conditions

Selective 5-hydroxymethylfurfural production from cellulose formate in DMSO-H<sub>2</sub>O media

Highly Efficient Production of 5-Methoxymethylfurfural from Fructose in Dimethyl Sulfoxide/Amberlyst-15 Catalytic System

Conversion of 5-hydroxymethylfurfural to chemicals: A review of catalytic routes and product applications

Structural Designs and Mechanism Insights into Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Chemical transformations of 5-hydroxymethylfurfural to highly added value products: Present and future

5‐hydroxymethylfurfural and its Downstream Chemicals: A Review of Catalytic Routes

Recent advances in the conversion of furfural into bio-chemicals through chemo- and bio-catalysis

Catalytic Systems for 5-Hydroxymethylfurfural Preparation from Different Biomass Feedstocks: A Review

Recent advances in catalytic conversion of biomass to 5-hydroxymethylfurfural and 2, 5-dimethylfuran

A Cobalt Catalyst for Reductive Etherification of 5-Hydroxymethyl-furfural to 2,5-Bis (methoxymethyl)furan under Mild Conditions

Carbon-Based Catalytic Materials for Aerobic Oxidative Transformation of 5-Hydroxymethylfurfural: Advancements, Challenges, and Opportunities

Recent advance on the catalytic system for efficient production of biomass-derived 5-hydroxymethylfurfural

Recent Advances in Heterogeneous-catalysis Transformation of 5-Hydroxymethyfurfural to 2,5-Dimethylfuran

Advances in Selective Electrochemical Oxidation of 5‐Hydroxymethylfurfural to Produce High‐Value Chemicals

Efficient Conversion of Glucose to Hydroxymethylfurfural: One‐pot Brønsted Base and Acid Promoted Selective Isomerization and Dehydration

Advances on the catalytic hydrogenation of biomass-derived furfural and 5-hydroxymethylfurfural

A critical review of recent advances in the production of furfural and 5-hydroxymethylfurfural from lignocellulosic biomass through homogeneous catalytic hydrothermal conversion

Furfural: A Promising Platform Compound for Sustainable Production of C4 and C5 Chemicals